On a vessel, multiplying a load’s weight by the distance of the load’s center of gravity above the baseline results in a(n) ______.
A.transverse moment
B.vertical moment
C.righting moment
D.inclining moment
The collision bulkhead shall be of ______.
A.water-tight
B.air-tight
C.fire-tight
D.oil-tight
Where shall we stow cargo on a vessel?
______ is just to put it ______ and notify me as to where and how the cargo was damaged.
A.What you ought to do with the damaged cargo/aside
B.What you should do with the damaged cargo/beside
C.What will you do with the damaged cargo/besides
D.What have you to do with the damaged cargo/side by side
Owner shall have a lien on the cargo for freight,dead-freight,demurrage and damages for detention.It means that ______.
A.Owner will not deliver the cargo if freight not paid
B.Owner will keep the dead-freight until the cargo has been delivered
C.Owner will keep the demurrage as soon as the cargo be delivered
D.Owner shall have no right of detention for the damaged cargo to be delivered
征题题卡格章节A437422Except as permitted in SOLAS paragraph 5.2.2, acsdoors,airinletsandopeningsto modation,征题题卡格章节A437422Except as permitted in SOLAS paragraph 5.2.2, acsdoors,airinletsandopeningsto modation,controlionsandmachineryshallface the cargo area.They shall be located on the transverse bulkhead not facing thecargo area or on the outboard side of the superstructure or deckhouse at a distance ofeast4% of the length of the ship but not lessn 3 m fromof the superstructure or deckhouse facing the cargo area. This distance need not exceed 5 m. TheAdministration may permit acs doors in boundary bulkheads facing the cargo area or withhe 5 m limits specified in SOLAS paragraph 5.2.1, to main cargo control sions and to such used as provirooms, store-rooms and lockers, provided they do not give acs directly or indirectly to any other space containing or providing formodation, control sions or servisuchasgalleys,pantriesorworkshops, or similar spacontaining sourof vapour ignition. The boundary of such a space shallbeinsulatedto“A-60”standard,withtheexceptionoftheboundaryfacingthecargo area. Bolted plates for the removal of machinery may be fitted withhe limits specified in paragraph 5.2.1. Wheelhouse doors and windows may be located withhe limits specified in paragraph 5.2.1 so long as they are designed to ensuret the wheelhouse can be made raly and efficiently gas and vapour tight.问6500100CO2情况是符合SOLASA B C DA, (出处SOLAS,II-2,Reg.Wang,Bin-
Why are most break bulk vessels built with the transverse framing system rather than the longitudinal system?
A.The transverse system is more resistant to hog and sag stresses
B.The numerous longitudinal frames cause excessive broken stowage
C.The transverse system provides better support to the varying cargo densities on a break bulk vessel.
D.The deep web frames interfere with the stowage of break bulk cargo
How should the lifeboat sea painter be rigged?
A.Spliced into the ring on the stem post
B.Secured by a toggle around the outboard side of a forward thwart
C.Secured to the inboard side of a forward thwart and led inboard of the falls
D.Secured by a toggle to the stem post and led outboard of the falls
TRANSVERSE MOVEMENT OF CARGO,ESPECIALLY BULK,CAUSED BY ROLLING OR A HEAVY LIST defines ______.
A.Shifting cargo
B.Moving cargo
C.Removing cargo
D.Trimming cargo
What is a requirement for remote manual shutdown stations for internal combustion engine driven cargo pumps on tank barges ________.
A.They must be conspicuously marked
B.They must be located at least 10 feet from the engine
C.There must be at least two such shutdown devices
D.The valve rods shall be fitted with stuffing boxes
______ is not a longitudinal structural member.
A.sideshell
B.bottom shell plating
C.inner bottom plating
D.transverse bulkhead