问题:单选题After using the alt_disk_install command to clone a system image to another disk, the system administrator noticed a large number of defined devices not allocated to the LPAR. Which of the following is the most likely cause of this situation?()A The cfgmgr command was not run to reconfigure the devicesB The machine was not booted into SMS MultiBoot mode after configurationC The machine was not in full system partition mode when the volume was createdD The alt_disk_install command was not run with the -O option to remove references in the ODM
查看答案
问题:单选题Companycom is purchasing a p5 590 which was configured with 60 Amp line cords. They have just indicated that their large datacenter is already wired for 100 Amp power circuits in the location where the server will be installed. What would be the recommended action?()A Use the 60 Amp line cordsB Change the 100 Amp connector to a 60 Amp circuitC Submit an RPQ to order the p5 590 with 100 Amp power cordsD Change the configuration and order the p5 590 with the 100 Amp power cords
问题:单选题Companycom needs to run a 32 bit kernel under AIX 5.3. What steps need to be done to accomplish this with the least disruption since the system is already installed with a 64 bit kernel?()A Reload the operating system and select 32 bit kernel on initial install.B Repoint the symbolic link of /unix to unix_mp. Perform a bosboot and reboot the partition.C Use the SMIT menu to select 32 bit versus the 64 bit kernel. Select 32 bits and reboot the partition.D Go into SMIT and select 32 bit kernel. Run the /usr/sbin/bootinfo -K command, and ensure that the kernel has been changed.
问题:单选题Companycom has several AS/400 servers in their IT infrastructure running V5R2 that they wish to consolidate. The customer wants to simplify their environment and install i5/OS on a p5 590 with 16 1.65GHz processors and 20 i5/OS partitions. The customer plans to use the Advanced Power Virtualization to share their storage, processors, and memory. What considerations and limitations should be reviewed with the customer before the purchase?()A Resources cannot be shared with an i5 partition when it is put on a pSeries. The i5 partition needs its own 9411-100 tower because of IOP. V5R3 OS or later is required. There is a maximum of two partitions in a 590.B Resources cannot be shared between partitions when i5/OS is put on a pSeries. The i5 partition needs its own 9411-100 tower because of IOP. i5/OS can be at V5R2 or a V5R3. Currently only one i5 partition is allowed. C V5R3 is required for the i5 partitions. Virtual IO Server is not supported for the i5/OS partitions to share storage. Up to 10 i5 partitions per processor are allowed (a maximum of two processors for up to 20 partitions). D Processor and memory resources can be shared between AIX 5L, Linux and i5/os partitions. i5/OS needs to be at V5R3, and Virtual IO Server is not supported for the i5/OS partition to share storage. On a 1.65 GHz POWER5 p5 590 there is a maximum of one partition.
问题:单选题Companycom tells the technical sales specialist that recent announcements state that virtual lan in the datacenter is the best option. The customer wants to use interpartition communication to save on adapters and increase performance. The systems are going to have shared and dedicated processor partitions. Some of the partitions will be running AIX 5.2 and some will be running AIX 5.3. The second p5 590 will be running a mixture of AIX 5.3 and Linux partitions with 2.6 kernel. What limitations of vlan/interpartition communication should be discussed with this customer?()A Virtual Ethernet uses the system processors for all communication functions instead of offloading that load to processors on network adapter cards. Virtual Ethernet is supported on AIX 5L and Linux 2.5 and above. B Virtual Ethernet can be used within groups of shared OR groups of dedicated processor partitions, but not both simultaneously. Virtual Ethernet comes with AIX 5L, and is supported in AIX 5.2 or AIX 5.3 partitions, but not Linux. C Virtual Ethernet can be used in both shared and dedicated processor partitions. Virtual Ethernet can run in an AIX 5.3 or Linux 2.6 Kernel, but not AIX 5.2 partitions. Virtual Ethernet can only connect partitions within a single system. D Virtual Ethernet uses the system processors for all communication functions instead of offloading that load to processors on network adapter cards. Virtual Ethernet can connect partitions between systems if the HMC is shared between systems.
问题:单选题What is a primary differentiator between pSeries eWLM (Enterprise Workload Manager) and WLM (Workload Manager)?()A pSeries eWLM can create classes while pSeries WLM can create tiers.B pSeries eWLM can create tiers while pSeries WLM can create classes.C pSeries eWLM is implemented over multiple O/S images while pSeries WLM is implemented within an individual O/S image.D pSeries eWLM is implemented within an individual O/S image while pSeries WLM is implemented over multiple O/S images.
问题:单选题A p5 570 12 way was purchased with the plan to install six LPARs running AIX 5.2. The machine has 12 disks spread evenly over the internal server drawers. The customer would now like to add a seventh LPAR. Which of the following should be added for the seventh LPAR boot device?()A An additional 7311-D10 drawerB An adapter to boot off a SAN deviceC An additional disk to the media bayD Two disks to the internal configuration
问题:单选题Companycom has restored their mksysb. They notice that the external volume groups cannot be seen. What should be done to access the volume groups?()A Run importvg commandB Run synclvodm commandC Recreate volume groupsD Update /etc/filesystems
问题:单选题Companycom is purchasing a 64-way p5 595. They have determined the location for the server is in a datacenter which does not have a raised floor. Which of the following would best meet the server requirements?()A The server must be installed into a location with a raised floor for optimum system cooling and cable management.B The server should be purchased as a p5 590 and then upgraded to a p5 595. This will eliminate the need for a raised floor environment.C The server should be purchased as 32-way p5 595 and then upgraded to a 64-way. This will eliminate the need for a raised floor environment.D The server can be installed into a location without a raised floor if an RPQ is obtained. It is a strong IBM recommendation for a raised floor, not a requirement.
问题:单选题The HMC software has just been upgraded remotely via the WebSM client. It now needs to be rebooted to make the update active. How can this be accomplished?()A Use ssh to connect to the HMC and rebootB The upgrade will display complete and ask you to rebootC Select shutdown in the Management section of the WebSM clientD Once logged out of the WebSM client it will ask to logoff, shutdown or reboot. Select reboot.
问题:单选题Companycom is considering a partitioned solution which will require cumulative rPerf total of 150. The original sizing came back recommending a 32-way p5 590. However, they have a requirement for future scalability and availability is important. Which of the following would be the best reason to recommend a p5 595?()A The p5 595 would allow for CODB The p5 595 includes the Advanced Power Virtualization hardware and softwareC The p5 595 is priced the same as the p5 590 given the same number/type of CPUsD The p5 595 performance would be equivalent to the p5 590 given the same number/type of CPUs
问题:单选题What type of configuration can provide the best availability in a Virtual IO Server environment?()A Provide multiple paths to all resources through 2 or more Virtual IO ServersB Mirror all disk resources on the Virtual IO Server to present to the client LPARC Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO ServerD Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter (SEA)
问题:单选题Companycom has a requirement to consolidate six web application servers. There is unused capacity of 2 CPUs on their new p5 570. Which operating systems and or features are required?()A APV, AIX5.2ML4B AIX5.3 or i5/OSC APV, i5/OS, AIX5.3D APV, AIX5.3 or SuSE9
问题:单选题Which Virtual IO Server function allows disk to be shared by multiple LPARs?()A Virtual LANB Virtual diskC Virtual SCSID Virtual serial
问题:单选题Companycom wants the application server LPAR to communicate with the database LPAR on a p5 590 without using network adapters. What does the customer need to install?()A VIO ServerB AIX 5.2 ML4C Shared Ethernet AdapterD AIX 5.3 with Advanced Power Virtualization
问题:单选题Companycom wants to reduce the number of copper, Ethernet adapters on their 4 way p5 570 running AIX 5.3 used in each of the four LPARs. Companycom has one database LPAR, two application LPARs, and one web LPAR. Only the Web LPAR needs to communicate with the outside world. What is the minimum number of Ethernet adapters that should be provided to ensure redundancy and no single point of failure?()A One single port Ethernet adapterB Four dual port Ethernet adaptersC Two single port Ethernet adaptersD Eight single port Ethernet adapters
问题:单选题During the Solution Assurance for a p5 590, Companycom states there is a plan to install OEM Emulex cards in the p5 590. The customer assumes there will be no problem with the plan since IBM resells the Emulex cards. What is the correct response for the customer?()A The IBM CE will install the cardB The card will not be supported by IBMC The AIX device driver should work fineD The customer is correct, there should be no problem
问题:单选题Companycom has seven days of vmstat data on four p5 590 production LPARs of four processors each. The data shows that all four LPARs have periodic utilizations of 90-95% lasting several minutes in duration. However, the average utilizations of the four LPARs were between 15-30%. The vmstat data shows that the peak utilizations of each LPAR do not occur at the same time. Which of the following should be set up?()A A shared pool with four capped LPARsB A shared pool with four uncapped LPARsC Four dedicated LPARs and use DLPAR to manage resources effectivelyD The server in SMP mode and use WLM to manage resources effectively
问题:单选题After rebooting the machine, Companycom notices that the machine is not performing as well as before. The applications are running slower, and their CPU utilization has increased. How can the customer check to see if a CPU was deallocated?()A Run the vmstat commandB Run the iostat commandC Run the lparstat commandD Check the logs in the /var/adm/ras directory