单选题A technician notices that there is a second partition on the primary hard drive. This partitionis notassigned a drive letter and is not accessible from Windows. Which of the following is the MOST likely explanation for this extra partition?（）A Space re

第1题：

A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）

• A、Optical drive
• B、Power supply
• C、CMOS battery
• D、CD-ROM disk

第2题：

A technician notices that there is a second partition on the primary hard drive. This partitionis notassigned a drive letter and is not accessible from Windows. Which of the following is the MOST likely explanation for this extra partition?（）

• A、Space reserved by the drive manufacturer for firmware.
• B、Space set aside by Windows for use by the virtual memory swap file.
• C、A potentially dangerous virus has been downloaded onto the system.
• D、A recovery partition put there by the manufacturer.

第3题：

第4题：

A technician notices a machine’s performance has degraded. The machine has constant errorswhen trying to read data from the drive. Which of the following should be used to repair the disk errors?（）

• A、DEFRAG
• B、MSCONFIG
• C、EDIT
• D、CHKDSK

第5题：

A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）

• A、The second hard drive has not been formatted for NTFS.
• B、The jumpers on both drives are set to the cable select position.
• C、The jumper on the first drive is set to master and the second is set to slave.
• D、The jumpers on both drives are set to the master position.

第6题：

A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）

• A、 backup the BIOS configuration to use later
• B、 install the BIOS update from a command prompt
• C、 create a bootable floppy and copy the BIOS update tools to the floppy
• D、 read the manufacturer’s guidelines and recommendations on installing the update

第7题：

After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）

• A、Install a larger fan near the hard drive to cool the system.
• B、Clean the drive with compressed air and continue to use it.
• C、Remove and replace the drive.
• D、Apply more thermal compound and reseat the drive.

第8题：

第9题：

A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）

• A、Add another hard drive and use that available space.
• B、Run FDISK.
• C、Use the Disk Management tool.
• D、Back up all important data to an external drive then reformat the hard drive.

第10题：

A technician wants to secure a Windows 7 Ultimate notebook hard drive. Which of the following should the technician do to implement BitLocker?（） (Select TWO).

• A、Disable TPM in the system BIOS
• B、Run the BitLocker wizard and any necessary partitions
• C、Enable TPM in the system BIOS
• D、Enable TPM in the Windows 7 OS files
• E、Set up the OS and the system files on the same partition