After installing a new SATA hard drive the technician notice

第1题：

A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）

• A、Use a jumper from the motherboard where the new drive is going to be installed.
• B、Use a jumper from a hard drive that is no longer functioning.
• C、Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.
• D、The new hard drive must be replaced

第2题：

The network technician is troubleshooting a network issue by implementing a new security device.After installing and configuring the device, which of the following steps should the technician takeNEXT?（）

• A、Verity full system functionality
• B、Identify the main problem and question the user
• C、Document their findings, actions, and outcomes
• D、Escalate the issue to upper management

第3题：

第4题：

A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）

• A、Add another hard drive and use that available space.
• B、Run FDISK.
• C、Use the Disk Management tool.
• D、Back up all important data to an external drive then reformat the hard drive.

第5题：

An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）

• A、SATA to SCSI
• B、SATA to HBA
• C、SATA to USB
• D、SATA to SAS

第6题：

Which of the following steps would be performed FIRST to install a fresh copy of Windows 7Professional on a new hard drive?（）

• A、Format the partition
• B、Load any RAID or SATA drivers needed
• C、Partition the drive
• D、Configure Windows settings

第7题：

A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）

• A、 backup the BIOS configuration to use later
• B、 install the BIOS update from a command prompt
• C、 create a bootable floppy and copy the BIOS update tools to the floppy
• D、 read the manufacturer’s guidelines and recommendations on installing the update

第8题：

第9题：

After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）

• A、Install a larger fan near the hard drive to cool the system.
• B、Clean the drive with compressed air and continue to use it.
• C、Remove and replace the drive.
• D、Apply more thermal compound and reseat the drive.

第10题：

A technician installed a new application on a Windows XP desktop. After the application wasinstalled, the technician rebooted the desktop and received a bluescreen error. Which of thefollowing steps should the technician perform?（） (Select TWO).

• A、Boot into Safe Mode
• B、Replace the motherboard
• C、Uninstall the application
• D、Replace the hard drive
• E、Install more RAM