单选题A technician needs to install the first SCSI controller in an application server. The SCSI card is factory-configured with a SCSI ID of 1. Which SCSI ID should the technician configure the card before installation？（）A  0B  1C  4D  7

第1题：

A technician is trying to install a previous-generation expansion card into their new laptop.However, the card refuses to fit into the expansion slot. Which of the following is MOST likely the reason?（）

• A、The card needs to have the compatibility jumpers set before it can be installed into the system.
• B、The card is a PCI Express card and the laptop supports pcmica.
• C、The expansion slot needs to be enabled in the blos first.
• D、The card is a PCMCIA card and the laptop supports PCI Express cards.

第2题：

You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort.  What should you do? （）

• A、Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver. 
• B、Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. 
• C、Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI       controller driver with the functional one. 
• D、Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional  SCSI controller driver into the original system folder, and restart the computer to the previous installation.

第3题：

第4题：

A technician needs to install the first SCSI controller in an application server. The SCSI card is factory-configured with a SCSI ID of 1. Which SCSI ID should the technician configure the card before installation？（）

• A、 0
• B、 1
• C、 4
• D、 7

第5题：

A server in a manufacturing environment needs to receive input from multiple measurement devices on the production line. Which of the following would be needed on the server？（）

• A、HBA card
• B、SCSI card
• C、Serial card
• D、Video card

第6题：

A technician has installed a new motherboard in a workstation, but after hardware tests, themotherboard has failed. Which of the following should the technician do FIRST before replacingthe motherboard? （）

• A、Reseat all power connections.
• B、Remove the CMOS battery.
• C、Install the graphics card.
• D、Ground to the case.

第7题：

You are the network administrator for Company.com.  Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.   You want to upgrade your computer to Windows 2000 Professional. What should you do?（）

• A、 Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter.     Start the installation from the Windows 2000 Professional CD-ROM.     Add the new adapter card drivers when you are prompted. 
• B、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Copy the drivers to C:/Winnt folder.      Start the installation from the Windows 2000 Professional CD-ROM. 
• C、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Start the installation by using the Windows 2000 Professional CD-ROM-     Add the new adapter card drivers when you are prompted. 
• D、 Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive.      Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on      the Windows 2000 Professional CD-ROM.

第8题：

SCSI总线上可连接7或15个设备，它们是靠给设备分ID号来区分的，并通过（）对SCSI设备进行设置。

• A、系统BIOS中
• B、SCSI控制器中的BIOS
• C、SCSI设备上的跳线
• D、SCSI设备在电缆上的位置

第9题：

An administrator needs to connect servers to the Fiber Channel SAN. Which of the following should the administrator install in the servers to allow this connection？（）

• A、Riser
• B、HBA
• C、SCSI card
• D、SAS card

第10题：

Which three should be documented after upgrading a SCSI RAID controller？（）

• A、 disk utilization
• B、 installation date
• C、 adapter baselines
• D、 location slot of the RAID controller
• E、 status of the adapter card installation
• F、 RAID controller information （warranty， specifications etc.）