disk utilization
installation date
adapter baselines
location slot of the RAID controller
status of the adapter card installation
RAID controller information (warranty, specifications etc.)
第1题:
A. RAID 5
B. RAID 1+0
C. RAID 0
D. RAID 1
第2题:
A server consists of two 72GB SCSI drives and four 146GB SCSI drives. All drives are attached to a RAID controller. The system’s administrator has decided to mirror two drives for the operating system. Which of the following is the maximum space the administrator will have remaining to use for data when using RAID 0?()
第3题:
You have a print server named Server1 that runs Windows Server 2003 Service Pack (SP2). Server1 isconfigured as shown in the following table.All the hard disks are 136 GB and are connected to a SCSI controller.You need to identify which disk configuration will provide the best performance for printing.Which disk configuration should you implement? ()
A. one RAID-0 volume
B. one RAID-1 volume
C. one RAID-5 volume
D. two RAID-1 volumes
第4题:
An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem?()
第5题:
An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?()
第6题:
A. RAID 1 +0
B. RAID 5
C. RAID 0
D. RAID 1
第7题:
An administrator recently installed a known good RAID adapter. During boot up, the administrator is able to access the RAID configuration utility; however, when the administrator checks for the card in the operating system, it does not show up. Which of the following should the administrator do FIRST?()
第8题:
An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash.Which of the following should the administrator do FIRST to troubleshoot the problem?()
A. Check the backplane cabling.
B. Check the server BIOS.
C. Update the RAID controller firmware.
D. Install the latest hard drive firmware
第9题:
An administrator notes that after a recent power outage, some open files were corrupted on one affected file server. Which of the following items should the administrator consider to determine the cause of this corruption?()
第10题:
A server has six drives of equal size attached to a RAID controller. Which of the following RAID levels would provide the FASTEST performance?()