单选题A technician is trying to retrieve a screw that fell inside a case and is just out of reach. Which of the following is the BEST procedure to retrieve the screw?()A Turn the case upside down, shake gently and let the screw fall out.B Use a shop vacuum t

题目
单选题
A technician is trying to retrieve a screw that fell inside a case and is just out of reach. Which of the following is the BEST procedure to retrieve the screw?()
A

Turn the case upside down, shake gently and let the screw fall out.

B

Use a shop vacuum to retrieve the screw.

C

Use the hardware abstraction layer (HAL).

D

Use an extension magnet.

如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

A twin-screw vessel with a single rudder is making headway. The engines are full speed ahead.There is no wind or current. Which statement is FALSE?

A.If one screw is stopped,the ship will turn toward the side of the stopped screw

B..The principal force which turns the ship is set up by the wake against the forward side of the rudder

C.Turning response by use of the rudder only is greater than on a single-screw vessel

D.With the rudder amidships,the ship will steer a fairly steady course


正确答案:C

第2题:

下列()为双螺杆挤出机。

  • A、Single-screw  extruder
  • B、Twin-screw  extruder

正确答案:B

第3题:

You may BEST turn a twin-screw vessel about,to the right,in a narrow channel by using ______.

A.Both engines ahead and helm

B.One engine only

C.Port engine ahead and the starboard engine astern

D.Both engines astern and use helm


正确答案:C

第4题:

Which of the following is the FIRST thing a technician should do before putting their hand inside a computer case?()

  • A、Acquire the appropriate tools that are going to be used.
  • B、Touch the case to discharge static.
  • C、Remove loose jewelry.
  • D、Refer to manufacturer documentation.

正确答案:C

第5题:

A technician dropped a screw in the case of a desktop computer. Which of the following toolsshould be used to retrieve the screws?()

  • A、Computer vacuum
  • B、Plastic tweezers
  • C、Canned air
  • D、Screwdriver with magnetized tip

正确答案:B

第6题:

When turning a ship in restricted space with a strong wind,it is normally best to ______.

A.Go ahead on both engines with the rudder hard to one side,if on a twin-screw vessel

B.Back down with the rudder hard to one side,if on a single-screw vessel

C.Take advantage of the tendency to back to port,if on a twin-screw vessel

D.Turn so that the tendency to back into the wind can be used,if on a single-screw vessel


正确答案:D

第7题:

Which of the following should a technician use to remove dust from the inside of a server case?()

  • A、Compressed air
  • B、Vacuum
  • C、Soap and water
  • D、Disinfecting wipes

正确答案:A

第8题:

Which of the following is the FIRST thing a technician should do before putting their hand inside a computer case?()

A. Acquire the appropriate tools that are going to be used.

B. Touch the case to discharge static.

C. Remove loose jewelry.

D. Refer to manufacturer documentation.


参考答案:C

第9题:

Which of the following would be the BEST device to use when removing a loose screw from theinside of a laptop?()

  • A、Needle-nose pliers
  • B、Extension magnet
  • C、Locking pliers
  • D、Loopback plug

正确答案:A

第10题:

Mike, a technician, is working on a computer and the air is dry. Which of the following choices is the BEST option for Mike to use?()

  • A、Use a portable anti-static pad and wrist strap, ensuring all components remain on the mat, and the wrist strap is connected to the mat.
  • B、Leave the computer plugged in and running, to stabilize the power, and keep one hand on the case at all times while working on the unit.
  • C、Use a wrist strap, connecting it to the computer case. Leave the computer plugged into the outlet for grounding.
  • D、Advise the customer it is best if the computer is taken back to the shop for repair, so it will be in a controlled temperature environment.

正确答案:A

更多相关问题