Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.
Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN.
Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver.
Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD
第1题:
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.
The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.
What should you do?
A.On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.
B.On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
C.Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.
D.Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.
E.Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
第2题:
You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."
Which two actions should you take to eliminate the STOP error? (Choose Two)
A.Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
B.Select Safe Mode from the Windows 2000 boot menu.
C.Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
D.Install a driver for the SCSI controller from a floppy disk.
E.Use Device Manager to update the driver for the SCSI controller.
第3题:
You are the desktop administrator for Ezonexam.com'ssalesdepartment. Ezonexam.com's network contains a RIS server.
You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation.
However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional.
You start the computer by using a RIS bootable floppy disk, and you receive the same result.
What should you do?
A.Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
B.Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
C.Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.
D.Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.
E.Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.
第4题:
What is the correct procedure to update the UEFI on HX5 with MAX5 blades without using the AMM?()
第5题:
A work order states that a customer used Windows updates and after rebooting the computer, the video driver was corrupted and the computer was in safe mode. Which of the following would be the BEST action to take?()
第6题:
You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.
You want to install Windows 2000 Server from source files that are located on a server on the network.
What should you do?
A.Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.
B.Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.
C.On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.
D.On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
第7题:
A technician is attempting to configure Windows XP Media Center on a desktop from a CD. The message that comes up on the screen says ‘Missing NTLDR press any key to reboot’. Which of the following should the technician do NEXT?()
第8题:
You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".
Which two actions should you take to eliminate the STOP error? (Choose Two)
A. Modify the Boot.ini file.
B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
C. Select Safe Mode from the Windows 2000 boot menu.
D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
E. Install a driver for the RAID controller form. a floppy disk.
F. Use Device Manager to update the driver for the RAID controller.
第9题:
A blade server has been configured to boot from SAN. After an HBA firmware upgrade the blade was rebooted and cannot find the operating system. Which of the following should the administrator do NEXT to troubleshoot the issue?()
第10题:
A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000. What is required for the customer to be able to perform this?()