You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Admi

题目

You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）

A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.
B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.
C、Restart the computer by using the last know good configuration.
D、Restart the computer in safe mode and reinstall the original network adapter driver.
E、Restart the computer and disable Plug and Play in the computer BIOS.

参考答案和解析

正确答案:C,D

如果没有搜索结果或未解决您的问题，请直接联系老师获取答案。

相似问题和答案

第1题：

You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？（）

A、Configure Windows 2000 Professional to enable driver signing.
B、Configure Windows 2000 Professional to disable driver signing.
C、Start the computer by using the recovery console， restore the system state data.
D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.

正确答案:A,D

第2题：

You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）

A、Configure a DNS suffix.
B、Configure a subnet mask.
C、Configure an LMHOSTS file.
D、Configure an Interface metric.
E、Configure at least one DNS address.

正确答案:B,E

第3题：

You are the administrator of your company's network. The network is configured as shown in the exhibit.

You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.

You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.

What should you do?

A．Add a computer running DHCP Relay Agent to the marketing segment.

B．Add a computer running the network monitor driver to the marketing segment.

C．Move the Windows 2000 Server computer running WINS to the marketing segment.

D．Move the Windows 2000 Server computer running Active Directory to the marketing segment.

正确答案：A
解析：Explanation: RIS requires DNS, DHCP, and Active Directory. These services are all present according to the exhibit. The problem is the router which isn't RFC-1542 compliant, i.e. it is not BOOTP compliant, and therefore the DHCP Server will not be reached from the marketing segment. Thus the computers will not be able to contact the RIS server since RIS clients require DHCP to acquire TCP/IP configuration. By adding a DHCP Relay Agent to the marketing segment the computers will be able to connect to the DHCP server, get their TCP/IP configuration, and connect to the RIS server.

Incorrect answers:
B: Network monitor driver is used to monitor network traffic. It cannot solve the problem in this scenario and is thus inappropriate.

C: In addition to a DHCP server, the RIS server requires the presence of a DNS server running Active Directory. As DNS and Active Directory are present in the exhibit, there is no need for the WINS server. Both WINS and DNS with Active Directory are responsible for name resolution. A WINS server is required for compatibility with older versions of Windows and with non-Windows computers.

D: A DHCP server, a DNS server and Active Directory is available on this network. These servers and services are required for RIS. However the RIS server cannot access the DHCP server as the router is not RFC-1542 compliant.

第4题：

You are the administrator of ExamSheet.net's network. You attempt to install a video driver on a Windows 2000 Professional computer. You receive the following error message: "Error 11 - Cannot install video driver." The driver was originally downloaded from the video card manufacturer's Web site. You have successfully used the driver in the past on other Windows 2000 Professional computers. You want to configure the Windows 2000 Professional computer to check for driver integrity and to allow you to install this video driver. What should you do? （）

A、Use the Hardware troubleshooter. Configure the computer to prevent the installation of unsigned drivers.
B、Use the Add Hardware wizard to install the driver. Create a Local Computer Policy to enable Windows File Protection
C、Configure driver signing to ignore File Signature Verification. Create a Local Computer Policy to enable Windows File Protection
D、Configure theUnsigned driver installation behaviorpolicy setting to beWarn but allow installation

正确答案:D

第5题：

You want to connect your Windows 2000 Professional computer to multiple TCP/IP subnets on your company’s network. Your computer currently has an ISA network adapter installed. You install a second ISA network adapter. After you restart your computer， you notice that the second ISA network adapter is not functioning. What should you do？（）

A、Set the driver signing option to block.
B、Set the driver signing option to ignore.
C、In the computer’s BIOS， reserve an unused IRQ for ISA devices.
D、In the Device Manager， configure the second ISA network adapter to use an unused IRQ.

正确答案:D

第6题：

You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）

A、Start the computer in Safe Mode. Enable driver signing.
B、Start the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.
C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.
D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.

正确答案:D

第7题：

You want to install Windows 2000 Professional on 45 new computers on your company’s network. You first install Windows 2000 Professional on one of the new computers. You log on to the computer by using the local administrator account. You install Microsoft Office 97, a virus scanner, and other company-standard applications. You then create a RIS image of the computer you configured. You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network. What should you do?（）

A、Run Rbfg.exe before installing the standard applications.
B、Run RIPrep.exe before installing the standard applications.
C、Copy the all users profile to the default users profile.
D、Copy the local administrator account profile to the default users profile

正确答案:D

第8题：

You are an administrator of Ezonexam.com's network. You want to perform. routine upgrades on your Windows 2000 Server computer. You use your non-administrator user account in the domain to logon to the server.

You want to upgrade all of the critical system files and patches on the server in the shortest possible time.

What should you do?

A．Use Windows Update.

B．Run System File Checker.

C．Log on as administrator and run Windows Update.

D．Log on as administrator and run System File Checker.

正确答案：C
解析：Explanation:WindowsUpdateisusedtoupgradethesystemfilesandtoretrieveandapplythelatestservicepacksandpatchesfortheoperatingsystem.AllnecessaryfilesaredownloadedthroughtheInternet.TobeabletorunWindowsUpdatewemusthaveadministrativerights.Incorrectanswers:A:Thenon-administrativeuseraccountcannotbeusedtorunWindowsUpdate.TorunWindowsUpdatewemusthaveadministrativerights.B:SystemFileCheckercheckstheintegrityofthesystemfiles.Itcannotbeusedtoupgradethesystemfilesortoretrieveandapplythelatestservicepacksandpatchesfortheoperatingsystem.D:SystemFileCheckercheckstheintegrityofthesystemfiles.Itcannotbeusedtoupgradethesystemfilesortoretrieveandapplythelatestservicepacksandpatchesfortheoperatingsystem.

第9题：

You install a 16-Bit ISA sound card on your Windows 2000 Professional computer. You install the manufacturer’s device driver for the sound card. You then restart the computer. During the start up process, the computer stops loading and Windows 2000 Professional. You restart the computer, and again the computer stops loading Windows 2000 Professional computer. You start the computer in Safe Mode. What should you do next?（）

A、Remove the sound card device driver by enabling driver signing.
B、Remove the sound card device driver by disabling driver signing.
C、Disable the sound card device driver by using the disable command.
D、Disable the sound card device driver by using computer management.

正确答案:D

第10题：

You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）

A、When away from the office use Device Manager to remove the adapter.
B、When away from the office configure the startup properties for the adapter to be automatic.
C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.
D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.

正确答案:C

You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Admin

题目

参考答案和解析

相似问题和答案

更多相关问题

相关内容