单选题Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows: Fibre Channel Card 01 - partition one - required  Fibre Channel Card 02 -

题目
单选题
Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows: Fibre Channel Card 01 - partition one - required  Fibre Channel Card 02 - partition one - required  SCSI adapter 01 - partition one - desired  IDE adapter 01 - partition one - required  Ethernet adapter 01 - partition one - required  Ethernet adapter 01 - partition two - required  SCSI adapter 02 - partition two - required  IDE adapter 01 - partition two - desired  Which of the following actions will enable the installation of the AIX image?()
A

Change the IDE adapter from desired to required in partition two and restart the partition to release the resource.

B

Purchase a SCSI DVD-ROM drive to connect to the SCSI adapter in partition two.

C

Purchase an LTO tape drive so that a system image backup can be created to install a new AIX partition.

D

Change the IDE adapter from required to desired in partition one and restart the partition to release the resource.

参考答案和解析
正确答案: B
解析: 暂无解析
如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?()

A.OSPF

B.RIP

C.FSPF

D.VSANs


参考答案:C

第2题:

Which of the following describes the advantage of using Fibre Channel over Ethernet (FCoE) in POWER6 and POWER7 Blades?()

  • A、The FCoE card provides both LAN and fibre channel function from a single card on the blade. 
  • B、The FCoE advanced technology removes the need for any BladeCenter switching to support this function.
  • C、Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.
  • D、The AIX device driver for FCoE has been completely rewritten for the current adapter, eliminating errors and performance issues.

正确答案:A

第3题:

An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs.For each given LPAR how should they add the PCI card to the LPAR profile?()

A.Add the fibre channel card as hared?Add the fibre channel card as ?hared?

B.Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?

C.Add the fibre channel card as esired?Add the fibre channel card as ?esired?

D.Add the fibre channel card as equired?Add the fibre channel card as ?equired?


参考答案:C

第4题:

A customer wants to boot from SAN with their IBM BladeCenter infrastructure.  What is required for the customer to be able to perform this? ()

  • A、4GB Modular Flash Drive for each Blade Server and Dual 15.8GB 2.5 Solid State Drive for each Blade Server 
  • B、Cisco Intelligent Gb Ethernet Switch Module and IBM BladeCenter Copper Pass-thru Module 
  • C、Fibre Channel Expansion Card for each Blade Server and Fibre Channel SAN Switch Module 
  • D、Cisco Intelligent Gb Ethernet Switch Module and Dual 15.8GB 2.5 Solid State Drive for each Blade Server

正确答案:C

第5题:

Company.com wants to reassign a host bus adapter (HBA) from one partition to another to  handle increased I/O workload on that partition. What needs to be done to dynamically move the card?()

  • A、Use the rmdev command to remove the card from the current partition before doing the DLPAR process.
  • B、Take the source partition down and do the DLPAR function on the target partition.
  • C、Assign the card to the required section of the target partition and run cfgmgr.
  • D、Dynamically remove the card from the source and add to target profile then reactivate the target profile.

正确答案:A

第6题:

A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL,P2P.Which path selection protocol is used by Fibre Channel fabrics?()

  • A、 OSPF
  • B、 RIP
  • C、 FSPF
  • D、 VSANs

正确答案:C

第7题:

Companycom is installing a Virtual IO Server to reduce the number of fibre channel adapters needed for each partition. The customer wants to use disk based copy functions to replicate the data on the LUNs. How can this be accomplished?()

  • A、Create LVM mirrors between LUNs
  • B、MPIO is necessary as the device driver
  • C、Use separate fibre adapters in the Virtual IO Server for each LUN
  • D、Virtual IO Server is a disk subsystem and must control the LUNs behind it

正确答案:B

第8题:

A customer plans to install ten Microsoft Windows servers, three Linux servers, and five AIX servers, with two Fibre Channel host bus adapters each as part of an IBM DS8700 implementation.What multipathing driver is required to build a redundant solution?()

A.RDAC

B.MPIO

C.SSPC

D.SDDPCM


参考答案:B

第9题:

A small IT department is deploying Power 720 servers exploiting virtualization technologies.  Each Power 720 will have two partitions, one with 6 cores and one with 2 cores, and both partitions having 32GB of memory each. Live Partition Mobility is being considered at some point in the future. What is the minimum AIX Edition required to support the customer?()

  • A、AIX Basic Edition
  • B、AIX Express Edition
  • C、AIX Standard Edition
  • D、AIX Enterprise Edition

正确答案:C

第10题:

A customer plans to install ten Microsoft Windows servers, three Linux servers, and five AIX servers, with two Fibre Channel host bus adapters each as part of an IBM DS8700 implementation. What multipathing driver is required to build a redundant solution?()

  • A、RDAC
  • B、MPIO
  • C、SSPC
  • D、SDDPCM

正确答案:B

更多相关问题