Use the rmdev command to remove the card from the current partition before doing the DLPAR process.
Take the source partition down and do the DLPAR function on the target partition.
Assign the card to the required section of the target partition and run cfgmgr.
Dynamically remove the card from the source and add to target profile then reactivate the target profile.
第1题：
A small organization is purchasing a POWER5 to consolidate four applications. Currently， each application has two Host Bus Adapters （HBA） connected to an Enterprise Storage Server （ESS）. The customer is concerned about the cost of purchasing eight new HBAs. Which feature of virtualization will be most beneficial to this organization？（）
第2题：
A customer has a failing HBA adapter and needs to identify the location of the adapter. Which of the following AIX commands should the specialist recommend the customer review？（）
第3题：
You‘re the systems administrator at Testing, and you create the following access control lists.You then enter the command "ip access-group 101 in" to apply access control list 101 to router TK1s e0 interface.Which of the following Telnet sessions will be blocked as a result of your access lists?（）
A. Telnet sessions from host A to host 5.1.1.10
B. Telnet sessions from host A to host 5.1.3.10
C. Telnet sessions from host B to host 5.1.2.10
D. Telnet sessions from host B to host 5.1.3.8
E. Telnet sessions from host C to host 5.1.3.10
F. Telnet sessions from host F to host 5.1.1.10
第4题：
A customer wants to directly attach five servers to an IBM System Storage DS8100. They do not intend to use any SAN switches and would like the servers to have a redundant connection to the IBM DS8100. What is the minimum number of DS8000 host adapter cards that the customer will require（）
第5题：
The administrator of a Power 595 server is required to concurrently host LPARs for two different customers. Both customers’ LPARs have the same VLAN ID and subnet range， but their traffic must be isolated from each other. Which feature within the system would provide this functionality？（）
第6题：
Company.com has installed and configured a VIO server utilizing a Shared Ethernet Adapter and is investigating some network performance issues visible on the clients. The customer wants to understand the total network connectivity from the clients out to the data center routers. Which of the following commands will identify the Shared Ethernet Adapter mapping？（）
第7题：
A FastT Host FC-2 bus adapter， a U320 SCSI adapter， and three 10/100Mb Ethernet adapters have to be installed as optimally as possible. This is going to be a 24X7 system. The addition of extra PCI-cards is a major consideration as well. Based on the following， what is the best configuration？（） （1）Slot 1 66MHz Bus 1 （2）Slot 2 66MHz Bus 1 （3）Slot 3 100MHz Bus 2 （4）Slot 4 100Mhz Bus 2 （5）Slot 5 133Mhz Bus 3 （6）Slot 6 133Mhz Bus 3
第8题：
The access control list shown in the graphic has been applied to the Ethernet interface of router R1using the ip access-group 101 in command.Which of the following Telnet sessions will be blocked by this ACL？（）
A.from host PC1 to host 5.1.1.10
B.from host PC1 to host 5.1.3.10
C.from host PC2 to host 5.1.2.10
D.from host PC2 to host 5.1.3.8
第9题：
Company.com has a VIO server with a configured virtual Ethernet adapter and a physical Ethernet adapter with an IP address on their local public network. They want to re-configure the physical Ethernet adapter as Shared Ethernet Adapter. When the mkvdev command is run， the following method error is returned： /usr/lib/methods/cfgsea . Which of the following will most likely resolve the problem？（）
第10题：
You are designing a Windows Server 2008 R2 Hyper-V virtualization environment. Your host servers must have the following elements： A dedicated management network adapter.A dedicated virtual network for child iSCSI network traffic.A dedicated virtual network for child network traffic with VLAN tagging. You need to choose adapters that minimize the host server processing. Which adapters should you choose？（）