increase the governor oil pressure
adjust the speed droop setting
adjust the speeder spring travel
adjust the compensating needle valve
第1题:
dial indicator
outside caliper
bridge gauge
tram rod
第2题:
excessive mist density in the crankcases
excessively high crankcase vacuum
excessively high bearing temperature
excessive carbon buildup in the lube oil
第3题:
When the ship, its main propulsion device equipped with clutch, arrived at the port and finished with the engine, the correct operation should be______.
A.disengaging the clutch firstly, then stopping the main engine
B.stopping the main engine firstly, then disengaging the clutch
C.stopping the cooling water pump firstly, then stopping the main engine
D.stopping the main engine and disengaging the clutch at the same time
第4题:
adjusts the idle speed control
drain and flushes the governor and replace the oil
adjusts the compensating needle valve
第5题:
White
Black
Blue
Clear
第6题:
excessive crankcase pressure
excessive lube oil temperature
contamination of the lube oil by water
contamination of the cooling water by lube oil
第7题:
Faster response from ahead to astern
Less fuel consumption
Cheaper initial installation cost
Less weight per unit of horsepower
第8题:
the extra weight required for the diesel reduction gearing
a minimum speed for the engines that limits the minimum speed of the vessel
the higher fuel consumption per SHP
the low efficiency of the system when a controllable pitch propeller is used
第9题:
starting air pressure
scavenge air pressure
over-speed trip
banjo oiler line
第10题:
overspeed trip
audible/visual alarm
the ships/boats general alarm
reserve oil storage tank