You need to set the default gateway of one of your TestKing

题目
单选题
You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?()
A

Switch(config)# ip default-network 192.168.12.1

B

Switch(config)#ip route-default 192.168.12.1

C

Switch(config)# ip default-gateway 192.168.12.1

D

Swicth(config)# ip route 192.168.12.1 0.0.0.0

如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

You are working as an administrator at TestKing, and you need to set the bandwidth of your routers serial port to 56K. Which of the following commands would you use?()

A. Bandwidth 56000

B. Bandwidth 56000000

C. Bandwidth 56

D. Bandwidth 56kbps


参考答案:C

第2题:

You are a technician at TestKing. Your newly appointed TestKing trainee wants to know what the CDP is.What would your reply be?()

  • A、It is globally enabled by default on Cisco routers.
  • B、It is globally enabled by default on all routers.
  • C、It is a proprietary protocol.
  • D、It is a non-proprietary protocol.
  • E、It can be used to gather hardware and protocol information about neighbor devices.

正确答案:A,C,E

第3题:

As a Ezonexam trainee you are required to set the default gateway on a Cisco switch to the IP address of 192.168.1.115. Which IOS command should you use?

A.TestKSwitch(config)# ip route-default 192.168.1.115

B.TestKSwitch(config)# ip default-gateway 192.168.1.115

C.TestKSwitch(config)# ip route 192.168.1.115 0.0.0.0

D.TestKSwitch(config)# ip default-network 192.168.1.115

E.None of the above


正确答案:B
解析:Explanation:
Use the "ip default-gateway" command to enter the IP address of the next-hop router interface that is directly connected to the switch where a default gateway is being configured. The default gateway receives IP packets with unresolved destination IP addresses from the switch.

Once the default gateway is configured, the switch has connectivity to the remote networks with which a host needs to communicate.

第4题:

You work as the enterprise exchange administrator at TestKing.com. TestKing.com makes use of Microsoft Exchange Server messaging solution. The TestKing.com network consists of a single ActiveDirectory domain named testking.com. TestKing.com is configured to run an exchange 2010 environment.  You are planning to design the installation of numerous Mailbox servers. TestKing.com Service LevelAgreement (SLA) requires the following: * The servers need to support 1,500 concurrent connections to mailboxes.* The servers need to maintain a latency of less than 20 milliseconds. You ensure deployment success you need to ensure that your design comply with the Service LevelAgreement (SLA) of TestKing.com. What should you do?()

  • A、The best option is to use the Exchange Server User Monitor (ExMon) tool to check if your design meets the requirements.
  • B、The best option is to use the Exchange Server Load Generator (LoadGen) 2010 tool to check if your design meets the requirements.
  • C、The best option is to use the Exchange Server Connectivity Analyzer (ExRCA) tool to check if your design meets the requirements.
  • D、The best option is to use the Exchange Server Jetstress 2010 tool to check if you design meets there quirements.

正确答案:B

第5题:

You are working as an administrator at TestKing, and you need to set the bandwidth of your routers serial port to 56K. Which of the following commands would you use?()

  • A、Bandwidth 56000
  • B、Bandwidth 56000000
  • C、Bandwidth 56
  • D、Bandwidth 56kbps

正确答案:C

第6题:

You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?()

A. Switch(config)# ip default-network 192.168.12.1

B. Switch(config)#ip route-default 192.168.12.1

C. Switch(config)# ip default-gateway 192.168.12.1

D. Swicth(config)# ip route 192.168.12.1 0.0.0.0


参考答案:C

第7题:

Your company runs Remote Desktop Services. You have a Remote Desktop Session Host (RD Session Host) server. You need to ensure that remote desktop users can print only to the printers that are installed on the RD Session Host server. What should you do?()

  • A、Enable the Do not allow client printer redirection Group Policy setting.
  • B、Disable the Do not allow client printer redirection Group Policy setting.
  • C、Enable the Do not set default client printer to be default printer in a session Group Policy setting.
  • D、Disable the Do not set default client printer to be default printer in a session Group Policy setting.

正确答案:A

第8题:

You are the network administrator for TestKing. Your network consists of a single

Active Directory domain. You manage a Terminal Server farm that includes five

terminal servers and a Terminal Services Licensing server named testking9. All

servers run Windows 2000 Server. There are 2,500 users who log on to the terminal

servers to access a custom human resource (HR) application.

You install Windows Server 2003 on a new server named testking10. Testking10 is

configured with all default settings enabled. You install Terminal Services and the

HR application on testking10. You instruct some users to access the HR application

on testking10.

Four months later, users report that they can no longer establish Terminal Services

sessions to testking10. You verify that users can connect to the other terminal

servers in your Terminal Server farm.

You need to ensure that users can run the HR application on all terminal servers on

the network.

What should you do?()


参考答案:B

第9题:

You are a systems administrator and you are about to assign static IP addresses to various servers on your network. For the network 192.168.20.24/29 the router is assigned to the first usable host address, while the last usable host address goes to your Sales server. Which one of the following commands would you enter into the IP properties box of the sales server?()

  • A、IP address: 192.168.20.14 Subnet Mask: 255.255.255.248 Default Gateway:192.168.20.9
  • B、IP address: 192.168.20.254 Subnet Mask: 255.255.255.0 Default Gateway:192.168.20.1
  • C、IP address: 192.168.20.30 Subnet Mask 255.255.255.248 Default Gateway:192.168.20.25
  • D、IP address: 192.168.20.30 Subnet Mask 255.255.255.240 Default Gateway:192.168.20.17
  • E、IP address: 192.168.20.30 Subnet Mask 255.255.255.240 Default Gateway:192.168.20.25

正确答案:C

第10题:

You are the network administrator for The network consists of a single Active Directory domain named All network servers run Windows Server 2003, and all client computers run Windows XP Professional. A member server named Testking1 functions as a file and print server. Testking1 is configured with default operating system settings. A user named Tess is a member of the local Backup Operators group on Testking1. She is responsible for performing backups on this computer. You need to ensure that Tess can create Remote Assistance invitations from Testking1. What are two possible ways for you to achieve this goal? ()(Each correct answer presents a complete solution. Choose two)

  • A、Log on to Testking1 with administrative privileges.Use the System Properties dialog box to enable Remote Assistance.
  • B、Direct Tess to use the System Properties dialog box to enable Remote Assistance on Testking1.
  • C、In your Default Domain Policy, enable the Solicit Remote Assistance setting.
  • D、In your Default Domain Policy, enable the Offer Remote Assistance setting.
  • E、Log on to Testking1 with administrative privileges. Use GPedit.msc to enable the Offer Remote Assistance setting.

正确答案:A,C

更多相关问题