违法和不良信息举报 联系客服
免费注册 登录

An administrator is trying to diagnose as to why a new VIO c

题目
单选题
An administrator is trying to diagnose as to why a new VIO client （vio_client1） cannot see an allocated disk （hdisk4） from a VIO server （VIOS-A）. The client virtual SCSI adapter has a slot ID of 5 and the corresponding VIO server virtual SCSI adapter has a slot ID of 3. The administrator checks the virtual SCSI configuration from the HMC using the following lshwres command.  lshwres –r virtualio --rsubtype scsi -m 9117-570*65ABCDE  --level lpar -F / lpar_name，slot_num，remote_lpar_name，remote_slot_num，backing_device VIOS A，5，vio_client2，2，hdisk3 VIOS-A，4，vio_client1，4，hdisk4 VIOS-A，3，vio_client1，6，hdisk5 VIOS-A，2，vio_client3，2，hdisk6 vio_client2，2，VIOS-A，5，hdisk0 vio_client1，4，VIOS-A，4，hdisk0  vio_client1，5，VIOS-A，3，null vio_client3，2，VIOS-A，2，hdisk0 From the output above，  what is the most likely reason why the client cannot see the mapped storage？（）
A

 The hard disk has been inccorectly mapped on the VIO server.

B

 The hard disk has been incorrectly addressed on the VIO client.

C

 The client SCSI adapter has been mapped to the incorrect server SCSI adapter.

D

 The server SCSI adapter has been mapped to the incorrect client server adapter.

如果没有搜索结果或未解决您的问题，请直接 联系老师 获取答案。
相似问题和答案

第1题：

Class a = new Class(); Class b = new Class();

if(a == b) returns true or false, why?


正确答案：
               

第2题：

An administrator needs to diagnose problems with a WINS server. Which of the following toolsshould be used?()

A.nslookup

B. nbtstat

C. dig

D. netstat


参考答案：B

第3题：

Why not ______ again?

A、try

B、tried

C、tries

D、trying


参考答案：A

第4题：

An administrator attempts to install the latest security patches for an older server. When the administrator runs the patch installer， the install fails. The administrator tries again， and the installer fails again.  Which of the following is the MOST likely reason for this？（）

  • A、 The administrator improperly configured the virtual memory settings on the server.
  • B、 The administrator is using incorrect patch switches for the install.
  • C、 The administrator is trying to install security patches for software that is not installed.
  • D、 The administrator is trying to install patches that require hard drive encryption on the server.

正确答案:C

第5题：

He is trying to find a new way to（）a living. Which of the following is not correct

Aget

Bearn

Ctake

Dmake


C
“take a living”是谋生的意思，故此题答案选C。

第6题：

An administrator suspects that an incorrect POTS line is carrying the DSL signal. Which of thefollowing will help diagnose this issue?()

A. Multimeter

B. Toner probe

C. Protocol analyzer

D. Butt set


参考答案：D

第7题：

A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server.Which limitation must be considered when planning the system configuration?（）

A.A VIO server requires a dedicated LHEA port.

B.There is a limit of 32 LPARs per virtual LAN.

C.Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.

D.Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.


参考答案：A

第8题：

Why might the Ezonexam network administrator set the configuration register to 0x2142 on a 2600 series Cisco router?

A．To boot the IOS from ROM

B．To reset the console password

C．To upload a new version of the configuration file

D．To upload a new version of the IOS

E．To allow a new memory upgrade to be recognized by the router


正确答案：B
解析：Explanation:
About 99 percent of the time someone uses a config-register, it's more than likely because of a lost router password. The two config-registers for recovering passwords are 0x2102 and 0x2142.

The first config-register, 0x2102, is the normal config-register if you boot the router from internal Flash. You can see this config-register by using the show version command.

In this output, you'll notice the last line says, "Configuration register is 0x2102." This is normal.

But let's say you forgot the router's password. To recover this password (as long as it's unencrypted), boot the router and bypass the startup-config using config-register 0x2142; you should then be able to see the password in the startup-config. You can use the same method for encrypted passwords, but you'll need to overwrite the original password with a new one. To change the configuration register, enter the following:
Router(config)# config-register 0x2142

This will instruct the router to bypass the configuration and boot up as if it were a brand new router using factory default settings.

第9题：

An administrator needs to diagnose problems with a WINS server. Which of the following toolsshould be used?（）

  • A、nslookup
  • B、nbtstat
  • C、dig
  • D、netstat

正确答案:B

第10题：

An administrator suspects that an incorrect POTS line is carrying the DSL signal. Which of thefollowing will help diagnose this issue?（）

  • A、Multimeter
  • B、Toner probe
  • C、Protocol analyzer
  • D、Butt set

正确答案:D

更多相关问题
相关内容