Your network contains a Routing and Remote Access server named RRAS1 and a DHCP server named DHCP1. RRAS1 and DHCP1 are located in different subnets.RRAS1 is configured to support VPN connections from the Internet. DHCP1 has a scope that provides IP addresses for the VPN connections.You need to ensure that VPN clients that connect to RRAS1 can receive IP addresses from DHCP1.What should you do?()
第1题:
You are a network administrator and you need to implement a routing protocol onyour network that provides:* Scalability* VLSM support* Minimal overhead* Support for connecting networks using routers of multiple vendorsWhich of the following routing protocol would best serve your needs?()
A. VTP
B. RIP version 1
C. EIGRP
D. OSPF
E. IGRP
F. CDP
第2题:
A routing table contains static, RIP, and IGRP routes destined to the same network with each route set to its default administrative distance. Which route will be the preferred route?()
第3题:
Based on the need to limit processing and bandwidth utilization due to dynamic routing protocol operation, the foll owing routing requirements have been specified for your network.- partial and incremental routing updates-only the devices affected by a topology change perform route recomputation- route recomputation only occurs for routes that were affectedWhich dynamic routing protocol should be deployed in your network to best meet these requirements?()
A. BGP
B. OSPF
C. IS - IS
D. EIGRP
E. RIPv2
第4题:
Your network contains an internal network and a perimeter network that are separated by a firewall. The perimeter network contains an Exchange Server 2010 Edge Transport server. You plan to deploy an internal Exchange Server 2010 organization that meets the following requirements:.Support EdgeSync synchronization .Support encrypted delivery of outbound e-mail messages to the Edge Transport server .Minimize the attack surface of the internal network Which TCP ports should you allow from the internal network to the perimeter network?()
第5题:
What parameters must you specify when you enable EIGRP routing?()
第6题:
A.Routing loops, hold down timers
B.Switching loops, split horizon
C.Routing loops, split horizon
D.Switching loops, VTP
E.Routing loops, STP
F.Switching loops, STP
第7题:
You are a network administrator and you need to implement a routing protocol on your network that provides: * Scalability * VLSM support * Minimal overhead * Support for connecting networks using routers of multiple vendors Which of the following routing protocol would best serve your needs?()
第8题:
A. The broadcast address, and AS number
B. The network number and AS number
C. EIGRP routing, network number and passive interface
D. EIGRP routing, network number, and AS
第9题:
The routers named Testking1 and Testking2 are both configured with RIP only.What will happen in the event of Testking1 receiving a routing update that contains a higher cost path to a network already in its routing table?()
第10题:
Which three JUNOS software features allow for increased security on your network?()