违法和不良信息举报 联系客服
免费注册 登录

（）assesses the priority of ident

题目

（）assesses the priority of identified risks using their probability of occurring, the corresponding impact on project objectives if the risks do occur, as well as other factors such as the time frame and risk tolerance of the project constraints of cost, schedule, scope, and quality.

  • A、Quantitative Risk Analysis
  • B、Qualitative Risk Analysis
  • C、Enterprise Environmental Factors
  • D、Risk Management Plan
如果没有搜索结果或未解决您的问题，请直接 联系老师 获取答案。
相似问题和答案

第1题：

______assesses the priority of identified ri sks using their probability of occurring，the corresponding impact on project objectives if the risks do occur，as well as other factors such as the time frame. and risk tolerance of the project constraints of cost，schedule，scope，and quality．

A．Quantitative Risk Analysis

B．Qualitative Risk Analysis

C．Enterprise Environmental Factors

D．Risk Management Plan


正确答案：B
解析：定性风险分析利用风险发生概率、风险一旦发生对项目产生的影响以及其他因素(如时间框架和项目制约条件，即成本、进度、范围、质量的风险承受度水平)，对已识别风险进行优先级的评估。
选项A是定量风险分析，选项B是定性风险分析，选项C是企业环境因素，选项D是风险管理计划。故B是正确的。

第2题：

AssumethescopedattributeprioritydoesNOTyetexist.Whichtwocreateandsetnewrequest－scopedattributeprioritytothevalue“medium”?()

A.${priority=‘medium’}

B.${requestScope[‘priority’]=‘medium’}

C.<c：setvar=priority”value=”medium”/>

D.<c：setvar=”priority”scope=”request”>medium</C：set>

E.<c：setvar=”priority”value=”medium”scope=”request”/>

F.<c：setproperty=”priority”scope=”request”>medium</c：set>

G.<c：setproperty=”priority”value=”medium”scope=”request”/>


参考答案：D, E

第3题：

●（71）assesses the priority of identified risks using their probability of occurring, the corresponding impact on project objectives if the risks do occur, as well as other factors such as the time frame. and risk tolerance of the project constraints of cost, schedule, scope, and quality.

（71）

A. Quantitative Risk Analysis

B. Qualitative Risk Analysis

C. Enterprise Environmental Factors

D. Risk Management Plan


正确答案：B

第4题：

当地面管制人员要求飞行人员在空中提供“应答机识别”时，你应（）

  • A、将ATC应答机的功能选择旋钮放“TEST”位
  • B、按ATC应答机上的“IDENT”按钮
  • C、按ATC应答机上的“IDENT”按钮，并保持一会，再松开

正确答案:C

第5题：

在Quidway中低端交换机上,要修改交换机STP的优先级,所用的命令是()。

A.[Quidway]stp priority priority

B.[Quidway]stp port priority priority

C.[Quidway-Ethernet0/1]stp priority priority

D.[Quidway-Ethernet0/1]stp port priority priority


答案：A

第6题：

()是最基本的TCP扫描技术。

A、TCP connect()扫描

B、TCP SYN扫描

C、TCP FIN扫描

D、TCP反向ident扫描


正确答案:A

第7题：

对于VRRP协议,我们把正常情况Master的优先级称为Priority(master),把正常情况下Backup的优先级称为Priority(backup),把监控端口失效时对Master优先级的影响成为Priority(reduced),则它们之间应满足如下关系()。

A.Priority(master)>Priority(backup)>Priority(master)-Priority(reduced)

B.Priority(master)

C.Priority(master)>Priority(backup)>Priority(reduced)

D.Priority(master)


答案A

第8题：

(iii) assesses TSC in terms of financial performance, competitiveness, service quality, resource utilisation,

flexibility and innovation and discusses the interrelationships between these terms, incorporating

examples from within TSC; and (10 marks)


正确答案：
(iii) The terms listed may be seen as representative of the dimensions of performance. The dimensions may be analysed into
results and determinants.
The results may be measured by focusing on financial performance and competitiveness. Financial performance may
be measured in terms of revenue and profit as shown in the data in the appendix of the question in respect of TSC. The
points system in part (a) of the answer shows which depots have achieved or exceeded the target set. In addition,
liquidity is another aspect of the measurement of financial performance. The points total in part (a) showed that
Leonardotown and Michaelangelotown depots appear to have the best current record in aspects of credit control.
15
Competitiveness may be measured in terms of sales growth but also in terms of market share, number of new
customers, etc. In the TSC statistics available in (a) we only have data for the current quarter. This shows that three of
the four depots listed have achieved increased revenue compared to target.
The determinants are the factors which may be seen to contribute to the achievement of the results. Quality, resource
utilisation, flexibility and innovation are cited by Fitzgerald and Moon as examples of factors that should contribute to
the achievement of the results in terms of financial performance and competitiveness. In TSC a main quality issue
appears to be customer care and service delivery. The statistics in the points table in part (a) of the answer show that
the Raphaeltown depot appears to have a major problem in this area. It has only achieved one point out of the six
available in this particular segment of the statistics.
Resource utilisation for TSC may be measured by the level of effective use of drivers and vehicles. To some extent, this
is highlighted by the statistics relating to customer care and service delivery. For example, late collection of consignments
from customers may be caused by a shortage of vehicles and/or drivers. Such shortages could be due to staff turnover,
sickness, etc or problems with vehicle maintenance.
Flexibility may be an issue. There may, for example, be a problem with vehicle availability. Possibly an increased focus
on sources for short-term sub-contracting of vehicles/collections/deliveries might help overcome delay problems.
The ‘target v actual points system’ may be seen as an example of innovation by the company. This gives a detailed set
of measures that should provide an incentive for improvement at all depots. The points system may illustrate the extent
of achievement/non-achievement of company strategies for success. For example TSC may have a customer care
commitment policy which identifies factors that should be achieved on a continuing basis. For example, timely collection
of consignments, misdirected consignments re-delivered at no extra charge, prompt responses to customer claims and
compensation for customers.

第9题：

Assumetworoutersonthesamesubnet,R1andR2,bothconfiguredforHSRP.R1hasapriorityof120.WhichofthefollowingHSRPinterfaceconfigurationswillalwaysresultintheR2becomingtheprimary?()

A.standby1priority110

B.standby1priority120

C.standby1priority130

D.standby1priority110preempt

E.standby1priority120preempt

F.standby1priority130preempt


参考答案：C, F

第10题：

Router R1 and R2 are both configured for HSRP.  Which two statements about the HSRP priorities  of these two routers are true？（）

  • A、 To assign the HSRP router priority in a standby group， the standby group-number priority  priority-value global configuration command must be used.
  • B、 The default priority of a router is zero （0）.
  • C、 The no standby priority command assigns a priority of 100 to the router.
  • D、 Assuming that preempting has also been configured， the router with the lowest priority in an  HSRP group would become the active router.
  • E、 When two routers in an HSRP standby group are configured with identical priorities， the router  with the highest configured IP address will become the active router.

正确答案:C,E

更多相关问题
相关内容