You are the network administrator for Ezonexam.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not inc

题目

You are the network administrator for Ezonexam.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.

You want to upgrade your computer to Windows 2000 Professional.

What should you do?

A．Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.

B．Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:\Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM.

C．Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.

D．Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.

参考答案和解析

正确答案：A
解析：Explanation: The hardware compatibility list (HCL) is a list of computers and peripherals that have been tested and have passed compatibility testing with the product for which the HCL is being developed. For example, the Windows 2000 HCL lists the products that have been tested and found to be compatible with Windows 2000. Before upgrading to Windows 2000, you should ensure that the computer hardware meets the minimum Windows 2000 hardware requirements. You must also check the Hardware Compatibility List or test the computers for hardware compatibility using the Windows 2000 Compatibility tool. Since the question mentions that the SCSI adapter is not included on the current HCL and that the original SCSI drivers, used for Windows NT is not compatible with Windows 2000, you should get a Windows 2000 Professional compatible SCSI adapter, start the installation of the Windows 2000 Professional CD-ROM and then add the new adapter card when prompted to do so.

Incorrect Answers:
B: When purchasing a new SCSI adapter card, you will obviously get the drivers for it as well. Since the problem stems from an originally incompatible SCSI driver, you need to get a new, compatible SCSI adapter card that will allow the upgrade to Windows 2000 Professional.

C: Windows 2000 drivers will not be obtainable from the SCSI adapter manufacturer, and besides, you will already have the Windows 2000 Professional CD-ROM.

D: There is no need to modify the Config.sys to use the existing SCSI adapter since the adapter is not Windows 2000 compatible.

如果没有搜索结果或未解决您的问题，请直接联系老师获取答案。

相似问题和答案

第1题：

You are the administrator of Ezonexam.com's Windows 2000 network.

Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.

You want to be able to access your project files when using either of the operating systems.

What should you do?

A．Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.

B．Configure Disk 2 as a dynamic volume then format as an NTFS partition.

C．Configure Disk 2 to use Encrypting File System (EFS).

D．Configure Disk 2 as a basic volume and format the volume as FAT32.

正确答案：A
解析：Explanation: Windows 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system.

Incorrect Answers:
B: Configuring Disk2 as a dynamic volume that is formatted as an NTFS partition will not ensure that you will be able to access your project files when making use of either operating system.

C: The Encrypting File System allows you to encrypt files on an NTFS volume so that only you can use them. This offers a level of protection beyond that provided by NTFS permissions, which you can use to restrict access to your files by others who log on to your computer. However, this does not grant access to files if the computer is configured as a dual booting system.

D: This option will not solve our problem, what you need to do is to upgrade to Windows NT Workstation 4.0 to Service Pack 4 or later.

第2题：

Your computer runs Microsoft Windows XP Professional. The computer also runs 20 third- party applications. You plan to upgrade your computer to Microsoft Windows Vista. The functionality of the existing applications must be maintained even after you upgrade your computer. You need to ascertain whether the hardware and software on the Windows XP Professional computer will support the upgrade.What should you do?（）

A.A

B.B

C.C

D.D

参考答案：C

第3题：

You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation.

You notice that users can still save files to drive D.

You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer?

A．Use Windows 2000 Professional to configure drive D as a dynamic volume.

B．Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive D.

C．Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permission.

D．Reinstall Windows NT workstation after configuring the disk code task.

正确答案：C
解析：Explanation: To prevent both Windows NT 4.0 Workstation and Windows 2000 Professional users from writing to the D drive, NTFS permissions must be used. For example, it could be used to deny users write permission.

Incorrect answers:
A: Configuring drive D as a dynamic volume would prevent Windows NT 4.0 Workstation users accessing drive D; however, Windows 2000 Professional users would still be able to access the drive.

B: Enabling EFS on drive D would prevent access to drive D from within Windows NT.

D: Neither Windows NT 4.0 Workstation nor Windows 2000 Professional supports a disk code task.

第4题：

You are the network administrator for Company.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional. You want to upgrade your computer to Windows 2000 Professional. What should you do?（）

A、 Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.
B、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:/Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM.
C、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM- Add the new adapter card drivers when you are prompted.
D、 Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.

正确答案:A

第5题：

You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）

A、Start the computer in Safe Mode. Enable driver signing.
B、Start the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.
C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.
D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.

正确答案:D

第6题：

You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.

Each computer has an 8 GB hard disk.

You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D.

In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.

You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.

What should you do?

A．Use Windows 2000 Professional to configure drive D as a dynamic partition.

B．Use Windows 2000 Professional to enable encrypting file system on drive D.

C．Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permission.

D．Reinstall Windows NT Workstation after configuring disk quotas.

正确答案：C
解析：Explanation: You can use NTFS permissions to prevent users from saving files to a specific drive, partition or folder. NTFS permissions can be set on Windows NT computers that use the NTFS file system. Setting the NTFS permissions to deny users write permissions will prevent the users from saving work files on the disk.

Incorrect answers:
A: Windows NT users cannot use dynamic partitions, as dynamic partitions are a storage feature that has been introduced with Window 2000. Thus, configuring drive D as a dynamic partition will prevent the Windows NT Workstation users from using the disk. However, the Windows 2000 Professional users will still be able to make use of the drive and to store files on the drive.

B: The Encrypting File System (EFS) is a file and folder security mechanism used to prevent unauthorized users from accessing encrypted files. This does not prevent users from saving files on the disk. It only prevents them from opening and reading encrypted files.

D: Reinstalling Windows NT will not prevent users in Windows 2000 to save files on disk D. As the installation process does not have an option to prevent users from saving files to specified locations.

第7题：

You are the network administrator for Ezonexam.com.

You need to upgrade a computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the installation of the Windows 2000 Server operating system.

During the text portion of the installation, you receive the following error message:

"Stop 0x00000078 Inaccessible_boot_device."

You want to successfully upgrade the computer.

What should you do? (Each answer presents part of the solution. Choose two)

A．Start the computer by using a DOS disk and run FDISK.

B．Update the firmware on the RAID controller.

C．Restart the installation. During the text-mode setup-mode setup, press F6.

D．Restart the installation. During the text-mode setup, create a new partition.

E．Insert a floppy disk containing the OEM SCSI driver and specify the additional driver.

正确答案：CE
解析：Explanation:Assoonasyourmachinebootsintothetext-basedportionofSetup,youmaynoticeapromptatthebottomofthescreenthattellsyoutopressF6ifyouneedtoinstalladditionalSCSIorRAIDdrivers.Ifyoudon'twanttheseadditionaldrivers,justwaitafewsecondsanditwillgoaway.ButifyoursystemhasaSCSIorRAIDcontrollerthatyouknowisn'tgoingtoinitializewithoutanOEM-provideddriver,you'llneedtowatchthispartofSetupcloselyandhitF6.You'llneedtopressF6atthePressF6prompttoinstallSCSIdrivers.ThiswillletyouaccessyourSCSIharddrivesorCD-ROMsthatrequireadriver.Incorrectanswers:A:Thisissimilartocreatingapartition.Thereisnoneedtocreateanewpartition.Thiswillnotupgradethecomputersuccessfully.B:Thisisnotrequired.UpdatingfirmwareontheRAIDcontrollerwillnotenableyoutosuccessfullyupgradethecomputerinthiscase.D:Thereisnoneedtocreateanewpartition,youshouldpressF6whichwillallowyoutosuccessfullyupgradethecomputerbyallowingaccesstotheharddrivesorfloppyorCD-ROMdrivesthatrequiresdrivers.

第8题：

You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.

You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.

What should you do?

A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.

B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.

C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.

D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.

正确答案：A
解析：Explanation:ToinstallaWindows2000computerasadomaincontrollerinaWindowsNT4.0domain,wemustfirstinstallWindowsNT4.0thecomputerasaBDCintheWindowsNT4.0domainandthenpromotetheBDCtoPDC.WemustthenupgradethemachinetoWindows2000Server.WhenupgradingthedomaincontrollersinaWindowsNTdomaintoWindows2000,wemustupgradetheprimarydomaincontrollerfirst.Incorrectanswers:B:ThecomputermustbeinstalledasBDCandthenlaterpromotedtoPDC.C:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.D:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.

第9题：

You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install an ISA-based SCSI adapter in your docking station. You insert your computer into the docking station and start the computer. The SCSI adapter is not detected during the startup process. You start the Add/Remove Hardware wizard. When the wizard process is finished, the SCSI adapter is not listed. You want to allow Windows 2000 Professional to detect the SCSI adapter. What should you do? （）

A、Restart the Add/Remover Hardware wizard. Manually add the SCSI adapter drivers.
B、Restart the computer in safe mode. Restart the Add/Remove Hardware wizard to detect the SCSI adapter.
C、Configure Windows 2000 Professional to use driver signing. Restart the Add/Remove Hardware wizard to detect the SCSI adapter.
D、Copy the SCSI adapter drivers to the Winnt/Driver Cache/i386 folder. Restart the Add/Remover Hardware wizard to detect the SCSI adapter.

正确答案:A

第10题：

You want to connect your Windows 2000 Professional computer to multiple TCP/IP subnets on your company’s network. Your computer currently has an ISA network adapter installed. You install a second ISA network adapter. After you restart your computer， you notice that the second ISA network adapter is not functioning. What should you do？（）

A、Set the driver signing option to block.
B、Set the driver signing option to ignore.
C、In the computer’s BIOS， reserve an unused IRQ for ISA devices.
D、In the Device Manager， configure the second ISA network adapter to use an unused IRQ.

正确答案:D

You are the network administrator for Ezonexam.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not inc

题目

参考答案和解析

相似问题和答案

更多相关问题

相关内容