You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.However, you receive the following error me

题目

You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.

You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.

However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".

You are unable to perform. the upgrade. What should you do to resolve the problem?

A．Convert the system partition to NTFS.

B．Disable Advanced Configuration and Power Interface (ACPI) support for the computer.

C．Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.

D．Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.

如果没有搜索结果或未解决您的问题，请直接联系老师获取答案。

相似问题和答案

第1题：

You are the network administrator for Ezonexam. The network includes a Microsoft Windows NT Server 4.0 member server computer that has a non-Plug and Play ISA network adapter.

You want to upgrade this computer to Microsoft Windows 2000 Server. You also want to ensure that you maintain the current device configuration during the upgrade.

What should you do? (Each correct answer presents part of the solution. Choose two)

A. Install the latest driver for the network adapter.

B. Disable the network adapter.

C. Start the upgrade process by using Winnt32.exe

D. Start the upgrade process by booting from the Windows 2000 Server compact disc.

E. Configure BIOS to reserve the IRQ currently in use by the network adapter.

F. Press F6 at the beginning of the text mode setup to specify an additional driver.

正确答案：CD
C,D 解析：Explanation: WINNT32 is used for upgrades from 32-bit Windows operating systems. You can invoke the program WINNT32.EXE, which is found on the CD-ROM in the I386 folder. This should comply with the requirements of the question since the Winnt32 command will not make changes to the Active Directory configuration or to an application directory partition.

Incorrect answers:
A: Installing the latest network adapter driver would be changing the current device configuration. This is contradictory to what the question asks for.

B: Disabling the network adapter is not what is desired.

E: Reserving IRQs would involve a change in the current configuration which is contradictory to what the question asks for.

F: To install the customized hardware abstraction layer (HAL) designed for the computer that the manufacturer has provided we must press F6 when the Windows 2000 setup prompts us to do so. Thus making use of F6 is necessarily a change in hardware configuration.

第2题：

You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.

You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.

What should you do?

A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.

B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.

C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.

D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.

正确答案：A
解析：Explanation:ToinstallaWindows2000computerasadomaincontrollerinaWindowsNT4.0domain,wemustfirstinstallWindowsNT4.0thecomputerasaBDCintheWindowsNT4.0domainandthenpromotetheBDCtoPDC.WemustthenupgradethemachinetoWindows2000Server.WhenupgradingthedomaincontrollersinaWindowsNTdomaintoWindows2000,wemustupgradetheprimarydomaincontrollerfirst.Incorrectanswers:B:ThecomputermustbeinstalledasBDCandthenlaterpromotedtoPDC.C:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.D:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.

第3题：

The network consists of a single domain named Ezonexam.com that includes 20 Windows NT workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers. You install Terminal Services on one of the Windows Server computers and Terminal Services Client on the 20 Windows NT Workstation 4.0 client computers. You create a system policy on the server that is configured as the terminal server. This system policy denies access to Network Neighborhood. You find that the users of the terminal server can still browse the network when they open My Network Places from Windows 2000 Professional computer or when they open Network Neighborhood from Windows NT Workstation 4.0 computers.

You want to prevent all users from browsing the network.

What should you do? (Each correct answer presents a complete solution. Choose two.)

A．Create a Windows Group Policy that denies user access to My Network Places.

B．Copy the Windows NT policy file to the 20 Windows NT Workstation 4.0 computers.

C．Create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator.

D．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the terminal server.

E．Configure the terminal server to use Application server mode. Select the Permissions compatible with Terminal Server 4.0 Users option.

正确答案：AC
解析：Explanation: The primary domain controller (PDC) is the server that maintains the master copy of the domain's user-accounts database and that validates logon requests. Prior to Windows 2000 every Windows NT network domain was required to have one, and only one, PDC. If you want to deny users of the terminal server browsing ability of the Network Neighborhood, you should create a group policy that denies access to My Network Places. (Microsoft is colloquially stuck with Network Neighborhood for My Network Places.)

第4题：

You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1.

Ezonexam1 is a backup domain controller and a member of Ezonexam.com's Windows 2000 Active Directory forest. The forest consists of three Windows 2000 domains. Ezonexam1 is the only remaining Windows NT Server 4.0. A new version of the application that runs on Windows 2000 Server has been developed that requires the use of Universal groups. The application will not run on a domain controller.

You need to upgrade Ezonexam1 to Windows 2000 Server and prepare for the installation of the new version of the application on Ezonexam1.

What should you do?

(Each correct answer presents part of the solution. Choose two.)

A．Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server. Install the new application on the Windows NT Server 4.0

B．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select option to make Ezonexam1 a member server.

C．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select the option to make Ezonexam1 a domain controller. After the upgrade, demote the domain controller.

D．Make any user accounts on Ezonexam1 members of Domain Global groups.

E．Convert the Windows 2000 domains to native mode.

正确答案：CE
解析：Explanation: A member server is a Windows Server 200 server that has been installed as a non-domain controller and joined to a domain. This allows the server to operate as a file, print, and application server without the overhead of account administration.

A domain controller is a Windows Server 2000 computer that is configured to store the domain database, commonly referred to as Active Directory. Native-mode domains have additional features that are unavailable to mixed-mode domains, but no longer support NT 4 domain controllers. In order to support universal groups, the domain must be configured for Windows 2000/2003 native mode. If the domain is configured for Windows 2000/2003 mixed mode (which supports Windows NT 4.0), then universal groups are not supported.

Since Ezonexam1 is a backup domain controller, requires the use of universal groups and cannot run the application, you need to upgrade Ezonexam1 to a member server, make it a domain controller and after the upgrade demote the domain controller as well as convert the Windows 2000 domains to native mode so as to be able to run the new application.

Incorrect answers:
A: This will not allow the application to run.

B: You need to demote the domain controller to member server after the upgrade.

D: You need to make provision for universal groups as required in the question. Even though universal groups can contain domain global groups, this is not what is required.

第5题：

You plan to install Windows 2000 Server on 10 new computers. These servers will provide file and print services in branch offices of Ezonexam.com. The company wants each branch office to purchase its own copy of Windows 2000 Server, and the installation in each branch office should use the serial number associated with the branch office's own copy.

You want to install, configure, and test Windows 2000 Server on these computers at the main office before shipping the computers to the branch offices. You want users in the branch office to enter the computer names and serial numbers when they receive the computers.

What should you do?

A．Install Windows 2000 Server on the computers by using an unattend.txt file, and then use the registry editor to remove the computer name and license details.

B．Start the installation process from an MS-DOS boot disk. Install Windows 2000 Server on the computers from an existing server by running the Winnt command with the PreInst switch.

C．Install Windows 2000 Server on the computers, and then use Setup Manager to create a sysprep.inf file for sysprep.exe. Place the sysprep.inf file on the computers and run the sysprep-nosidgen command.

D．Create an unattend.txt file by using Setup Manager. Include the following line in the unattend.txt file. emPrenistall=YES. Use this file to perform. the installation.

正确答案：C
解析：Explanation: To install Windows 2000 Server on different computers using different serial numbers, we would have to install Windows 2000 Server on one computer and then use sysprep to create a sysprep.inf file. We can the use the sysprep-nosidgen command to prevent the computers SID from being replicated: the users will enter computer names and serial numbers when they install the clone.

Incorrect answers:
A: The Sysprep utility is used to remove the computer names and serial numbers, not the registry editor.

B: In this scenario we must use Sysprep cloning, not an unattended installation.

D: In this scenario we must use Sysprep cloning, not an unattended installation.

第6题：

You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.

Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.

You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?

A．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.

B．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.

C．Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.

D．Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.

正确答案：C
解析：Explanation:Windows2000printersautomaticallyallowWindows2000printerclientstodownloadthecorrectprinterdriver.However,down-levelclients,likeWindowsNT4.0,Windows95andWindows98wouldnotbeabletodownloadprinterdriversautomaticallyiftheWindows2000printserverdoesnothavethedown-levelprinterdrivers.Thesecanbeinstalledseparatelyontheprintserverthoughandthedown-levelclientswouldthenenjoythesameautomaticinstallationofprinterdrivers.Incorrectanswers:A\B\D:ThedriversshouldbeinstalledontheWindows2000printservernotcopied.

第7题：

You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.

When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".

Which two actions should you take to eliminate the STOP error? (Choose Two)

A. Modify the Boot.ini file.

B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.

C. Select Safe Mode from the Windows 2000 boot menu.

D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.

E. Install a driver for the RAID controller form. a floppy disk.

F. Use Device Manager to update the driver for the RAID controller.

正确答案：BE
B,E 解析：Explanation: The boot drive is inaccessible and only the text mode partition of the installation process was successful. We need to install the correct driver for the boot disk. We do this by restarting the installation process from the Windows 2000 installation CD, and during the early part of Setup, we watch the bottom of the screen for a line that prompts us to press F6. Then we press F6 and install the RAID driver from the diskette.

Incorrect answers:
A: The boot.ini points to the correct partition, but the correct drivers have not been installed yet.

C: The boot menu is not reached.

D: We must use the Windows 2000 Server CD-ROM to restart the installation process.

F: We will not be able to start the Device Manager. The installation process has failed.

第8题：

You are the administrator of a Windows NT Server 4.0 computer names Ezonexam1.

Ezonexam1 is a backup domain controller in Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disks 0 and 1 are configured as a Windows NT 4.0 mirror set and contain the operating system files. There are 300 MB of disk space remaining on the Windows NT 4.0 mirror set. Disk 2, 3, and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and currently has 15 GB free. Ezonexam1 runs an application that is used by all of Ezonexam.com's employees.

A new version of the application is available. The new version requires Windows 2000 Server. The application will not run on a domain controller.

You need to install the new application on Ezonexam1 as quickly as possible.

What should you do first?

A．Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.

B．On a second Windows 2000 Server computer, run the sysprep utility to create a cloned server image. Use this image to upgrade Ezonexam1.

C．Upgrade Ezonexam1 to be a Windows 2000 member server. After the upgrade, run the dcpromo utility on Ezonexam1.

D．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.

正确答案：C
解析：Explanation:AmemberserverisaWindowsServer200serverthathasbeeninstalledasanon-domaincontrollerandjoinedtoadomain.Thisallowstheservertooperateasafile,print,andapplicationserverwithouttheoverheadofaccountadministration.OnceaserverhasbeeninstalledwithWindowsServer2000,youcanupgradeittoadomaincontrollerthroughtheDcpromoutility.Incorrectanswers:A:ConfiguringDual-bootingwillnotallowtheapplicationtobeinstalledasquicklyaspossible.B:SysprepisatoolthatfacilitatescreatingadiskimageofyourWindows2000Serverinstallation.Diskduplicationisagoodchoiceifyouneedtoinstallanidenticalconfigurationonmultiplecomputers.Butthisisnotwhatisrequiredinthiscase.D:MakingEzonexam1amemberserverisnotenough.Youalsoneedtomakeuseofthedcpromoutility.

第9题：

You are the administrator of a Windows 2000 Server network. On each server, you format a separate system partition and a separate boot partition as NTFS.

Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message "NTLDR is missing. Press any key to restart".

You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do?

A．Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.

B．Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall. When installation is complete, copy the NTLDR file to the root of the boot volume.

C．Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.

D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.

正确答案：A
解析：Explanation: If the boot sector cannot find NTLDR, Windows 2000 cannot start. This can be caused by moving, renaming, or deleting Ntldr, corruption of Ntldr, or corruption of the boot sector. Under these circumstances, the computer might not respond to input or might display an error message. The Recovery Console can be used to restore the ntldr.exe file. This process would not create any other side effects.

Incorrect answers:
B: We cannot reinstall Windows 2000 as we do not want to loose any settings.

C: System File Checker (sfc.exe) is a command line utility that scans and verifies the versions of all protected system files after restarting your computer. It cannot be used to restore the ntldr.exe file

D: Using File Signature Verification, we can identify unsigned files on our computer; however we would not be able to restore the ntldr.exe file.

第10题：

You are the administrator of a network that includes Windows NT Server 4.0 computers, Windows NT Workstation 4.0 computers, and UNIX computers. The network consists of a single Windows NT domain.

You are upgrading a Windows NT Server computer named Server1 to Windows 2000 Server. Server1 is a BDC in the domain. The existing DNS server is a UNIX computer that supports SRV (service) records and is configured to accept dynamic updates. The existing WINS server is another Windows NT Server computer.

You want to configure Server1 as a domain controller in a New Active Directory forest. You want the existing Windows NT domain accounts to be upgraded to Active Directory. You plan to upgrade the other domain controllers in the domain to Windows 2000 after the upgrade of Server1 is complete.

You want to perform. the upgrade of Server1 with the least possible impact on other computers on the network. What should you do?

A．Promote Server1 to the PDC of the domain. Run Windows 2000 Setup on Server1.

B．Run Windows 2000 Setup on Server1. At the end of Setup, configure Server1 as a DNS server and a WINS server.

C．Add a static mapping for Server1 on the WINS server. On the DNS server, create an SRV record for the LDAP service on Server1. Run Windows 2000 Setup on Server1.

D．Install the Microsoft DNS service on an existing Windows NT server. Apply Windows NT 4.0 service pack 4 or later to the server. Run Windows 2000 Setup on Server1.

正确答案：A
解析：Explanation: We want to upgrade the NT domain to an Active Directory domain; particularly we want to migrate the NT user accounts. First we need to promote server1 to PDC since it contains the master copy of domain information - SAM. Then upgrade the PDC to Windows 2000 Server. Active Directory requires a DNS server that supports SRV (service records). The UNIX DNS server supports this.

Incorrect answers:
B: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.

C: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.

D: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network.

You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.However, you receive the following error me

题目

相似问题和答案

更多相关问题

相关内容