the BIOS settings are incorrect.
there is no floppy disk in the drive.
the computer was unable to make temporary space for the boot process.
the computer was unable to find the information needed to start the boot process.
第1题:
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.
The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.
What should you do?
A.On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.
B.On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
C.Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.
D.Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.
E.Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
第2题:
You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."
Which two actions should you take to eliminate the STOP error? (Choose Two)
A.Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
B.Select Safe Mode from the Windows 2000 boot menu.
C.Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
D.Install a driver for the SCSI controller from a floppy disk.
E.Use Device Manager to update the driver for the SCSI controller.
第3题:
You are the network administrator for Ezonexam. You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.
You want to install Windows 2000 Server from source files that are located on a shared folder called I386 on a Windows 2000 Server computer named Ezonexam1.
What should you do? (Each correct answer presents part of the solution. Choose two)
A.On a Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.
B.On a Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, and Ntbootdd.sys to this disk. Start the new computer by using the disk.
C.Start the new computer by using a Windows 98 network boot disk.
D.Connect to \\Ezonexam1\I386 and run Winnt32.exe.
E.Connect to \\Ezonexam1\I386 and run Winnt.exe.
第4题:
The error ’invalid boot disk’ means:()
第5题:
Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?()
第6题:
You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.
You want to install Windows 2000 Server from source files that are located on a server on the network.
What should you do?
A.Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.
B.Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.
C.On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.
D.On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
第7题:
You are the network administrator for Ezonexam.
The network includes a Windows 2000 Server computer that contains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.
Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.
One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: "Boot disk or operating system not found." You use Recovery Console to discover that the files on partition C are corrupted.
You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.
What should you do?
A.Start the computer by using a Windows 2000 Server compact disc. Select the Repair option in Setup.
B.Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.
C.Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corrupted files on partition C by copying them from the Emergency Repair Disk.
D.Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.
第8题:
You are the administrator of a Windows 2000 Server network. On each server, you format a separate system partition and a separate boot partition as NTFS.
Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message "NTLDR is missing. Press any key to restart".
You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do?
A.Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.
B.Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall. When installation is complete, copy the NTLDR file to the root of the boot volume.
C.Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.
D.Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
第9题:
Which policy determines what happens to local data and to the BIOS settings on a server during the discovery process and when the server is disassociated from a service profile?()
第10题:
When attempting to boot a PC, the POST process completes without error. The PC then displays,‘non system disk or disk error’. Which of the following would MOST likely cause the issue?()