单选题Company.com would like to configure a virtual Ethernet between an AIX V5.3 LPAR and an AIX V5.2 LPAR. Which of the following options is necessary to complete this task？（）A Remove the physical Ethernet adapters from the LPARsB Activate Advanced POWER Vi

第1题：

Companycom wants to reduce the number of copper, Ethernet adapters on their 4 way p5 570 running AIX 5.3 used in each of the four LPARs. Companycom has one database LPAR, two application LPARs, and one web LPAR. Only the Web LPAR needs to communicate with the outside world. What is the minimum number of Ethernet adapters that should be provided to ensure redundancy and no single point of failure?（）

• A、One single port Ethernet adapter
• B、Four dual port Ethernet adapters
• C、Two single port Ethernet adapters
• D、Eight single port Ethernet adapters

第2题：

Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）

• A、Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS
• B、Use DLPAR to move resources from the test LPAR to training when training is active
• C、Install Partition Load Manager to share resources between the test and training environments
• D、Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs

第3题：

第4题：

A customer is debating whether to use Shared Ethernet versus Virtual Ethernet.  Which of the following best describes a key difference between Shared and Virtual Ethernet？（）

• A、Shared Ethernet runs on POWER4 systems
• B、Virtual Ethernet runs on POWER4 systems
• C、Shared Ethernet requires a Virtual I/O server and Advanced Power Virtualization
• D、Virtual Ethernet requires a Virtual I/O server and Advanced Power Virtualization

第5题：

A p5 570 customer is currently running AIX 5.3. The customer now wants to add Virtual Ethernet to two of the LPARs. This will enable the application tier can communicate to the database tier without using an external Ethernet card. What is the best way to accomplish this task?（）

• A、Create a VIO server
• B、Modify the LPAR profiles to add a Virtual Ethernet adapter
• C、Buy the Advanced Power Virtualization feature and enter a authorization code at the HMC
• D、Buy the Advanced Power Virtualization feature and enter a authorization code at the service  processor menu

第6题：

Companycom has a p5 590 that has their production LPAR, their Tivoli Storage Manager (TSM) LPAR, and several other LPARs. What method would provide connectivity between the production LPAR, and the TSM LPAR, but be isolated from the other LPARs in the system without utilizing a Virtual IO Server or physical adapter resources?（）

• A、Use shared memory and semaphores to transfer the data to the TSM LPAR
• B、Provide gigabit Ethernet adapters in each LPAR and run a crossover cable
• C、Create a Virtual Ethernet between the production server and the TSM LPARs
• D、Create a Virtual Ethernet between the TSM server LPAR and the non-production LPARs

第7题：

It has become necessary to configure an existing serial interface to accept a second Frame Relay virtual circuit.Which of the following processes are required to accomplish this task?（）

• A、configure static frame relay map entries for each subinterface network.
• B、remove the ip address from the physical interface
• C、create the virtual interfaces with the interface command
• D、configure each subinterface with its own IP address
• E、disable splithorizon to prevent routing loops between the subinterface networks
• F、encapsulate the physical interface with multipoint PPP

第8题：

Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）

• A、The FCoE card provides both LAN and fibre channel function from a single card on the blade. 
• B、The FCoE advanced technology removes the need for any BladeCenter switching to support this function.
• C、Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.
• D、The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.

第9题：

Company.com would like to share CPU resources between AIX V5.3 and Linux partitions. Which solution would best satisfy this customer requirement？（）

• A、Micro-Partitioning
• B、Partition Load Manager
• C、eWLM
• D、Grid Toolbox

第10题：

Company.com would like to configure a virtual Ethernet between an AIX V5.3 LPAR and an AIX V5.2 LPAR. Which of the following options is necessary to complete this task？（）

• A、Remove the physical Ethernet adapters from the LPARs
• B、Activate Advanced POWER Virtualization
• C、Update microcode for the virtual adapters
• D、Upgrade AIX V5.2 LPAR to AIX V5.3