area 0.0.0.0{ linkneighbor-id 172.168.18.2 transit-area 0.0.2.1;}
area 0.0.0.0{ virtual-linkneighbor-id 172.168.18.2 transit-area 0.0.2.1;}
area 0.0.0.1{ virtual-linkneighbor-id 172.168.18.2 transit-area 0.0.2.1;}
area 0.0.2.1{ virtual-linkneighbor-id 172.168.18.2 transit-area 0.0.0.0;}
第1题:
下面哪条命令是正确的,如果要将192.168.1.0/24的业务网段发到OSPF的area0()
A.Router(config-router)network 192.168.1.0 0.0.0.2550
B.Router(config-router)network 192.168.1.0 0.0.0.255 area0
C.Router(config-router)network 192.168.1.0 255.255.255.255 area0
D.Router(config-router)network 192.168.1.0 0.0.0.0 area0
第2题:
Several links have been broken so th at for the next day or two, what was formerly a contiguous area 0 has been broken into two parts. However, both parts of area 0 have working links into area 1 using routers with RID 1.1.1.1 and 2.2.2.2.Which answers list the command on the router with RID 1.1.1.1 to create a virtual link to help solve this temporary problem?()
A. area 0 virtual - link 2.2.2.2
B. area 1 virtual - link 2.2.2.2
C. area 0 source - rid 1.1.1.1 dest - rid 2.2.2.2
D. virtual - link transit - area 1 RID 2.2.2.2
第3题:
某园区网采用 OSPF路由协议,参与 OSPF的网络地址是 169.111.0.0/16, Cisco路由器的正确配置是 ( ) 。
A) Rounter(config)# router ospf63
Rounter(config-router)# network 169.111.0.0 0.0.0.0 area 0
Rounter(config_router)# area o range 169.111.0.0 255.255.0.0
B) Rounter(config)# router ospf63
Rounter(config-router)# network 169.111.0.0 255.255.0.0 area 0
Rounter(config-router)# area o range 169.111.0.0 255.255.0.0
C) Rounter(config)# router ospf63
Rounter(config-router)# network 169.111.0.0 0.0.255.255 area 0
Rounter(config_router)# area o range 169.1-11.0.0 255.255.0.0
D) Rounter(config)# router ospf63
Rounter(config_router)# network 169.111.0.0 0.0.255.255 area 0
Rounter(config-router)# area o range 169.111.0.0 0.0.255.255
第4题:
Refer to the exhibit. During the process of configuring a virtual link to connect area 2 with the backbone area, the network administrator received this console message on R3:*Mar 1 00:2 5:01.084: %OSPF -4- ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual link but not found from 20.20.20.1, Serial 0 .How should the virtual link be configured on the OSPF routers to establish full connectivity between the areas?()
A.R1(config - router)# area 0 virtual - link 1.1.1.1R3(config - router)# area 2 virtual - link 3.3.3.3
B.R1(config - router)# area 1 virtual - link 2.2.2.2 R3(config - router)# area 1 virtual - link 2.2.2.2
C.R1(config - router)# area 1 virtual - link 20.20 .20.2 R3(config - router)# area 1 virtual - link 30.30.30.2
D.R1(config - router)# area 1 virtual - link 30.30.30.3 R3(config - router)# area 1 virtual - link 20.20.20.1
E.R1(config - router)# area 1 virtual - link 3.3.3.3 R3(config - router)# area 1 virtual - link 1.1 .1.1
第5题:
A. They are originated by Area Border Router and are sent into a single area to advertise an Autonomous System Border Router.
B. They are originat ed by Area Border Routers and are sent into a single area to advertise destinations outside that area.
C. They are originated by the DR on every multi - access network. They include all attached routers including the DR itself.
D. They are originated by every router in the OPSF network. They include all routers on the link, interfaces, the cost of the link, and any known neighbor on the link.
第6题:
A.
B.
C.
D.
第7题:
A. All interfaces will be in area 0
B. The router will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 1
C. The route r will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 2
D. The router will be an ABR with s1/0 in area 0, f0/0 in area 1, and f0/1 in area 2
第8题:
某园区网采用OSPF路由协议,参与OSPF的网络地址是169.111.0.0/16 Cisco路由器的正确配置是
A.Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.0.0 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0
B.Router (config) #router ospf 63 Router (config-router) # network 169.111.0.0 255.255.0.0 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0
C.Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.255.255 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0
D.Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.255.255 area 0 Router (config-router) #area 0 range 169.111.0.0 0.0.255.255
第9题:
A. A virtual link to area 0.
B. OSPF summarization command.
C. default - cost extension to the area command.
D. no - summary extension to the area stub comm and.
E. None of the other alternatives apply
第10题:
A. On the ABR router ospf 10 area 3 stub
B. On all Area 3 routers router ospf 10 area 3 stub
C. On all Area 3 routers router ospf 10 area 3 stub no - summary
D. On the ABR router ospf 10 area 3 nssa
E. On the ABR rou ter ospf 10 area 3 stub no - summary