Use SMIT to have the server use DHCP instead of a static address
Edit /etc/rc.tcpip and start the dhcpsd daemon
Use the network options command to enable ipforwarding
Edit /etc/rc.net to set network options back to default
第1题:
An administrator must assign static IP addresses to the servers in a network.For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address. Which of the following should be entered into the IP propertied box for the sales server?()
A. IP address:192.168.20.14 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.9
B. IP address:192.168.20.254 Subnet Mask:255.255.255.0 Default Gateway:192.168.20.1
C. IP address:192.168.20.30 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.25
D. IP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.17
E. IP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.25
第2题:
A. Set the IP gateway to be used by the network.
B. Perform host discovery used DHCPDISCOVER message.
C. Configure IP address parameters from DHCP server to a host.
D. Provide an easy management of layer 3 devices.
E. Monitor IP performance using the DHCP server.
F. Assign and renew IP address from the default pool.
第3题:
The Ezonexam network administrator wants to ensure that only a single web server can connect to pot Fa0/1 on a catalyst switch. The server is plugged into the switch's Fast Eth. 0/1 port and the network administrator is about to bring the server online. What can the administrator do to ensure that only the MAC address of this server is allowed by switch port Fa0/1? (Choose two)
A.Configure port Fa0/1 to accept connections only from the static IP address of the server
B.Configure the MAC address of the server as a static entry associated with port Fa0/1
C.Employ a proprietary connector type on Fa0/1 that is incomputable with other host connectors
D.Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server
E.Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address
第4题:
When a DHCP server is configured, which two IP addresses should never be assignable to hosts? ()
第5题:
第6题:
A network administrator wants to ensure that only the server can connect to port Fa0/1 on a Catalyst switch. The server is plugged into the switch Fa0/1 port and the network administrator is about to bring the server online. What can the administrator do to ensure that only the MAC address of the server is allowed by switch port Fa0/1?()
A. Configure port Fa0/1 to accept connections only from the static IP address of the server.
B. Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.
C. Configure the MAC address of the server as a static entry associated with port Fa0/1.
D. Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.
E. Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.
F. Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1.
第7题:
第8题:
The Dynamic Host Configuration Protocol provides configuration parameters to Intemet ( ). DHCP consists of two components: a ( ) for delivering host-specific configuration parameters from a DHCP server to a host and a mechanism for allocation of network addresses to hosts. DHCP is built on a client-server model, where designated DHCP server hosts allocate network addresses and deliver ( ) parameters to dynamically configured hosts. DHCP supports three mechanisms for IP address allocation. In "automatic allocation", DHCP assigns a ( ) IP address to a client. In "dynamic allocation", DHCP assigns an IP address to a client for a limited period of time. In "manual allocation", a client&39;s IP address is assigned by the network ( ), and DHCP is used simply to convey the assitped address to the client.
A.switchB.termmalC.hostsD.usersA.routerB.protocolC.hostD.mechanismA.controlB.broadcastC.configurationD.transmissionA.permanentB.dynamicC.cormectionD.sessionA.controllerB.userC.hostD.administrator
第9题:
your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static ip addresses. The branch office does not use DHCP and uses a different subnet. You need to ensure that the portable computers can connect to network resources at the main office and the branch office. How should you configure each portable computer?()
第10题:
A database administrator wants a unique IP address for each of three instances of a database. Normally,all instances run on a large production node,but they may fallover to different standby nodes according to the dynamic node priority configuration. What is the best way to obtain unique addresses for each of the three database instances?()