Refer to the exhibit. Given the DHCP pool configuration show

Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）

A. Network B

B. Network A and Network B

C. Network A

D. neither Network A nor Network B

Refer to the exhibit. A network administrator has configured DHCP services on the router asshown. DHCP clients connected to the FastEthernet0/0 interface are working properly. DHCP clients connected to the FastEthernet0/1 interface are not receiving addresses.Which two statements contain recommendations that will solve the problem?（）

A.The network shown in the output under the ip dhcp pool Central command should be changed to network 10.10.0.0 with a mask of 255.255.255.0

B.A second DHCP pool for network 10 .10.0.0/24 should be configured

C.An ip dhcp excluded - address global configuration command for network 10.10.0.0/24 should be issued

D.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/0 c onfiguration

E.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/1 configuration

A. show ip local pool

B. show ip dhcp local pool

C. show ip dhcp-local pool

D. show ip pool

A. DHCPDISCOVER packets will reach the DHCP server.

B. The router will not forward DHCPDIS COVER packets because it has not been configured to do so.

C. This configuration is applied to interface Fa0/1.

D. DHCPDISCOVER packets will not reach the DHCP server because DHCPDISCOVER packets are broadcasts.

E. DHCPDISCOVER packets will not reach the DHCP server because ports 67 and 68 have not been explicitly allowed by the ip forward - protocol command.

F. This configuration is applied to interface Fa0/0.

A.show ip ospf

B.show ip ospf interface

C.show ip ospf neighbor

D.show ip ospf database

E.show ip ospf statistics

F.show running - config begin router ospf

A. The router will rebroadcast any DHCP requests received by this interface out to all interfaces included in the ip helper - address commands.

B. The router will rebroadcast any UDP broadcasts received by this interface out to all interfaces included in the ip helper - address commands.

C. The router will unicast any DHCP requests received by this interface out to all addresses included in the ip helper - address commands.

D. This configuration will not do anything because the ip helper - address command needs to also be applied to the 192.168.23.1 IP address.

A. show ip route

B. show policy - map

C. show access - lists

D. show route - map

A. The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address 10.10.0.1.

B. DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2.

C. The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP a ddress 10.0.0.1

D. The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address 10.0.0.6.

E. Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router.

A. The crypto isakmp configuration is not correct.

B. The crypto map configuration is not correct.

C. The interface tunnel configuration is not correct.

D. The network configuration is not correct; netw ork 172.16.1.0 is missing.

A. DHCP requests from the host will be rebroadcasted to R2.

B. To complete t his configuration, the R1 fa0/0 interface must be configured with the ip helper - addresses command.

C. To complete this configuration, the R2 fa0/0 interface must be configured with the ip helper -addresses command.

D. R1 will forward all DHCP requests t o both 192.168.100.1 and 192.168.200.1 as unicast messages.

E. R1 will forward DHCP requests to 192.168.100.1. If there is no response, R1 will then forward the requests to 192.168.200.1.