On a Cisco Aironet 1240AG Series standalone access point， th

第1题：

The Cisco Aironet 1140 Series Access Point draws 12.95 W at the power source. However， whenusing a long Ethernet cable， the device can draw up to how much additional wattage？（）

• A、0.25 W
• B、0.45 W
• C、1 W
• D、1.25 W
• E、2.45 W
• F、5.65 W

第2题：

As the Company wireless administrator， you required to be knowledgeable about the wireless LAN  components.  Which two statements about these components are true？ （）

• A、 In the autonomous access point solution， control is provided by the WLAN controller.
• B、 In the lightweight access point solution， WLAN management is provided by the WLAN Control  System （WCS）.
• C、 In the autonomous access point solution， control is provided by the WDS （Wireless Domain  Services）.
• D、 Cisco Aironet autonomous access points cannot be supported by the Cisco Unified Wireless  Network.
• E、 Ii the lightweight access point solution， WLAN management is provided by the WLAN Solution  Engine （WLSE）.
• F、 Cisco Aironet lightweight access points cannot be supported by the Cisco Unified Wireless  Network.

第3题：

You are using standalone cisco aironet 1400 series wireless bridges for a nine-mile point-to-point wireless link between two buildings. Which distance setting should you use for the bridge configured as the root？（）

• A、20 km [12.4 miles]
• B、10 km [6.2 miles]
• C、5 km [3.1 miles]
• D、25 km [15.5 miles]
• E、15 km [9.3 miles]

第4题：

A customer has deployed a wireless core feature set using autonomous access points and now wants to include a satellite building 4500 feet away from the main campus. The customer also wants to provide wireless access to a courtyard for wireless clients in close proximity to the antenna mounting position. Which Cisco Aironet product is the most applicable solution？（）

• A、 Cisco Aironet 1000 Series
• B、 Cisco Aironet 1100 Series
• C、 Cisco Aironet 1200 Series
• D、 Cisco Aironet 1300 Series
• E、 Cisco Aironet 1400 Series

第5题：

On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking， butthe status LED and Ethernet LED are both off. What does this indicate？（）

• A、A firmware upgrade is in progress.
• B、An access point buffer overflow is occurring.
• C、The internal radio has failed.
• D、The access point is booting.

第6题：

What is the maximum recommended height at which a cisco aironet 1000 series controller-based access point should be mounted when using integrated antennas？（）

• A、16 feet [4.8 meters]
• B、24 feet [7.3 meters]
• C、8 feet [2.4 meters]
• D、40 feet [12.1 meters]

第7题：

You are using standalone Cisco Aironet 1400 Series Wireless Bridges for a nine-mile point-to-point wireless link between two buildings. Which distance setting should you use for the bridgeconfigured as the root？（）

• A、20 km [12.4 miles]
• B、10 km [6.2 miles]
• C、5 km [3.1 miles]
• D、25 km [15.5 miles]
• E、15 km [9.3 miles]

第8题：

On a standalone access point， client association using EAP-Cisco Wireless （Cisco-LEAP） is failing， butassociation using EAP-PEAP is functioning. What needs to be enabled on the standalone access point tocorrect this issue？（）

• A、a shared key
• B、network EAP
• C、open authentication plus EAP
• D、open authentication plus MAC

第9题：

Which cisco aironet series has a built-in digital thermometer designed to protect the radio？（）

• A、cisco aironet 1500 series
• B、cisco aironet 1400 series
• C、cisco aironet 1300 series
• D、cisco aironet 1200 series

第10题：

On a Cisco Aironet 1130AG Series standalone access point， the status LED is dark blue and blinking. What does this indicate？（）

• A、The internal radio has failed.
• B、A firmware upgrade is in progress.
• C、An access point buffer overflow is occurring.
• D、The access point is booting.