defines the source IP address that i s used in all broadcast packets on DLCI 202
defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP address
defines the destination IP address that is used in all broadcast packets on DLCI 202
defines the DLCI on which packets from the 192.168.1.2 IP address are received
第1题:
A.The Seria l0/0interface is passing traffic.
B.The DLCI 100 was dynamic allyallocated by the router
C.The Seria l0/0 interf aceacquired the IP address of 172.16.3.1 from a DHCP server
D.The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud
E.The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP
第2题:
A.to map a known DLCI to an IP address
B.to mapa known IP address to a MAC address
C.to map known SPID toa MAC address
D.to map a known DLCI to a MAC address
E.to map a known IP address to a SPID
F.to mapa known MAC address to an IP address
第3题:
在配置命令frame-relay map ip10.1.1.17broadcast中,数字7的含义是()。
A.本端逻辑通道编号
B.本端DLC编号
C.对端接口编号
D.对端节点编号
第4题:
it is belong a family of ip routing protocols,each router have a partial map of network,what is the routing protocol?
第5题:
在“frame-relay map ip192.168.0.1100”这条命令中192.168.0.1和100指的是对端路由器的IP地址和DLCI。
第6题:
A. The number of FECN packets that are received by the router
B. The number of BECN packets that are received by the router
C. The ip address of the local router
D. The value of the local DLCI
E. The status of the PVC that is configured on the router
第7题:
What is the purpose of the inverse ARP?()
第8题:
查看帧中继PVC路由表的命令是( ) A、 show frame-relay pvc B、 show frame-relay route C、 show frame-relay pvc route D、 show rame-relay map
第9题:
What is the purpose of the inverse ARP?()
第10题:
What is the purpose of the inverse ARP?()