cut-through
fragment-free
frame-filtering
store-and-forward
802.1q forwarding
VTP transparent mode
第1题:
You are the network administrator setting up the IP network for a new branch office. You need at least 5 networks with 25 hosts each. You have been allocated a /24 network.Which prefix length will satisfy the given requirements?()
A./24
B./26
C./27
D./28
第2题:
A. Review the architectural plans to see how many drops go to each closet.
B. Count the number of rooms near each closet and standardize eight drops per room.
C. Wireless is the new standard and no network switches will be needed in the building,
D. Count the number of phone ports and configure two network ports for each phone port.
第3题:
A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).
A.You must set each end of the trunk line to IEEE 802.1e encapsulation.
B.You must set the same VTP management domain name on both switches.
C.You must set all ports on the two switches as access ports.
D.You must configure one of the switches as a VTP server.
E.You must use a rollover cable to connect the two switches.
第4题:
A switch that is to be added to the production network has been preconfigured (trunks, VLANs, VTP, and STP) and was tested in your lab. After installing the switch into the network, the entire network went down. What might explain what happened? ()
第5题:
A. The use of Full-Duplex Mode.
B. The Creation on New Collision Domains.
C. The Creation on New Broadcast Domains.
D. The Addition of Hubs to the Network.
E. The use of switches in the Network.
F. The Amount of ARP or IPX SAP Traffic.
第6题:
The network administrator has just finished installing a new 10/100/1000 switch, but receives reports from the server administrator that servers connected to the new switch seem to be experiencing slow LAN connections. The network administrator checks the port connecting the new switch to the core switch and sees the following information:Which of the following is the MOST likely cause of the slow connections?()
A. The servers have not had VLAN tagging enabled on their NICs.
B. Speed and duplex have not been set.
C. VLAN tagging was not set on the trunk.
D. The servers have been connected with CAT5 cable.
第7题:
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()
A. cut-through
B. fragment-free
C. frame-filtering
D. store-and-forward
E. 802.1q forwarding
F. VTP transparent mode
第8题:
When is a switched network that is running the Spanning Tree Protocol considered to be fully converged?
A.when all switches have the same BID as the root switch
B.when all switches have received the MAC address of each neighboring switch
C.when every enabled switch port has been assigned a unique identifier
D.when every operating switch port is in either the blocking or forwarding state
E.when all switches are in either client, server, or transparent mode
第9题:
第10题:
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()