a centrifuge
an electric motor
a bowl assembly
a driving motor
第1题:
A.It can be applied to separate two liquids
B.It cannot separate solids which contaminated in the oil.
C.It consists of purifier and clarifier
D.The centrifuge arranged to separate two liquids is known as purifier
第2题:
The primary function of an electric motor is to ______.
A.develop torque
B.generate high voltages
C.produce a magnetic field
D.generate high electrical resistance
第3题:
Overspeed of the diesel engine driving an electric generator could cause ______.
A.low voltage trip
B.reverse power trip
C.damage to windings
D.excessive exhaust temperatures
第4题:
to their final position with the winch operating at slow speed
to the bar stop,and then hand cranked to their final position
until just before they make contact with the limit switch,and then hand cranked to their final position
to the embarkation deck,and then hand cranked to their final position
第5题:
If an attempt is made to hoist a load that exceeds the capacity of an electric winch,an overload safety device causes a circuit breaker to cut off the current to the winch motor ______.
A.when the line pull reaches the rated winch capacity
B.after the line pull exceeds the rated winch capacity
C.after a short build-up of torque
D.immediately
第6题:
If a centrifugal pump is driven by a constant speed electric motor and produces a discharge pressure less than designed, the cause is probably ______.
A.excessive pump speed
B.excessive suction head
C.worn wearing rings
D.gross pump misalignment
第7题:
Which device is designed to automatically hold the load if power should fail to an electric winch?
A.Pneumatic brake
B.Electromagnetic brake
C.Hand brake
D.Motor controller
第8题:
A.prime mover speed
B.number of energized main motor poles
C.propulsion generator field strength
D.electric coupling field strength
第9题:
ram relief valves bypass oil to stop rudder movement
six-way valve shifts to the neutral flow position
steering pump electric motor is de - energized by the transfer switch
follow-up gear takes the hydraulic pump off stroke
第10题:
in the pert position
in the starboard position
in the neutral position
to be dismantled