sealing clamps
repair tape
a tube patch
sail twine and vulcanizing kit
第1题:
The upward slope of a vessels bottom from the keel to the bilge is called ______.
A.camber
B.sheer
C.rake
D.rise of bottom
第2题:
A term applied to the bottom shell plating in a double-bottom ship is ______.
A.bottom floor
B.outer bottom
C.shear plating
D.tank top
第3题:
5 The directors of Blaina Packaging Co (BPC), a well-established manufacturer of cardboard boxes, are currently
considering whether to enter the cardboard tube market. Cardboard tubes are purchased by customers whose
products are wound around tubes of various sizes ranging from large tubes on which carpets are wound, to small
tubes around which films and paper products are wound. The cardboard tubes are usually purchased in very large
quantities by customers. On average, the cardboard tubes comprise between 1% and 2% of the total cost of the
customers’ finished product.
The directors have gathered the following information:
(1) The cardboard tubes are manufactured on machines which vary in size and speed. The lowest cost machine is
priced at $30,000 and requires only one operative for its operation. A one-day training course is required in order
that an unskilled person can then operate such a machine in an efficient and effective manner.
(2) The cardboard tubes are made from specially formulated paper which, at times during recent years, has been in
short supply.
(3) At present, four major manufacturers of cardboard tubes have an aggregate market share of 80%. The current
market leader has a 26% market share. The market shares of the other three major manufacturers, one of which
is JOL Co, are equal in size. The product ranges offered by the four major manufacturers are similar in terms of
size and quality. The market has grown by 2% per annum during recent years.
(4) A recent report on the activities of a foreign-based multinational company revealed that consideration was being
given to expanding operations in their packaging division overseas. The division possesses large-scale automated
machinery for the manufacture of cardboard tubes of any size.
(5) Another company, Plastic Tubes Co (PTC) produces a narrow, but increasing, range of plastic tubes which are
capable of housing small products such as film and paper-based products. At present, these tubes are on average
30% more expensive than the equivalent sized cardboard tubes sold in the marketplace.
Required:
(a) Using Porter’s five forces model, assess the attractiveness of the option to enter the market for cardboard
tubes as a performance improvement strategy for BPC. (10 marks)
第4题:
escapes
overheats
expands
accelerates
第5题:
气胀式救生衣()
第6题:
______ is not a longitudinal structural member.
A.sideshell
B.bottom shell plating
C.inner bottom plating
D.transverse bulkhead
第7题:
在HTML中,盒子模型中元素实际占位的高度应该为()。
第8题:
A、the bottom of the lake
B、the bottom of lake
C、bottom of the lake
D、bottom of a lake
第9题:
A customer asks the technician for an explanation of the cause of a printer issue, after the issue is resolved. Which of the following would be the MOST appropriate response?()
第10题:
open the CO2 inflation valve
open the raft container
ensure that the operating cord is secured to the vessel
inflate the raft on the vessel,then lower it over the side