vapor feed heater
air ejector condenser
saltwater heater
distillate cooler
第1题:
greater distillate purity through high temperature evaporation
cold shocking for scale removal is not required
less internal corrosion because of lower brine density
less feed-water is required for equal plant capacity
第2题:
a separate air ejector unit
a direct unimpeded connection between second stage and salt water feed heater
either by vacuum drag or an external line from the first stage via a fixed orifice
the fixed orifice provided in the steam supply line
第3题:
Which of the listed problems could produce a high absolute pressure within a flash type evaporator?
A.production of high salinity distillate
B.seawater feed temperature below 165℃
C.a leak in the first stage demister
D.a cracked distillate pump vent line
第4题:
Production of high salinity distillate
Seawater feed temperature below 165℃
A leak in the first stage demister
A cracked distillate pump vent line
第5题:
vaporize, with the un-flashed water remaining at the temperature at which it entered the flash chamber
vaporize, with the un-flashed eater equalizing to the saturation conditions existing in the f lash chamber
vaporize, with the remaining water a t a temperature greater than it entered the flash chamber
boil, allowing steam bubbles to rise through the brine at the bottom of the flash chamber
第6题:
poor distillate quality
reduced evaporator capacity
low brine concentration
improper vacuum regulation
第7题:
lower condensing
higher cooling
lower cooling
higher condensing
第8题:
completely filled with saltwater
filled with de-scaling compound
tightly closed to exclude air
vented to the atmosphere
第9题:
to decrease scale formation
for better cooling effect
for more economical purpose
to raise vacuum
第10题:
loss of second stage vacuum
contamination of the distillate
lower feed inlet temperature
contamination of the second stage condenser