违法和不良信息举报 联系客服
免费注册 登录

Router R1 connects to a Frame Relay cloud using a multipoint

题目
单选题
Router R1 connects to a Frame Relay cloud using a multipoint subinterface, with ten PVCs associated with the subinterface. What command would make this router not use a DR and require static OSPF neighbor definition?（）
A

ip ospf network broadcast

B

ip ospf netw ork non - broadcast

C

ip ospf network point - to - multipoint

D

ip ospf network point - to - multipoint non - broadcast

如果没有搜索结果或未解决您的问题，请直接 联系老师 获取答案。
相似问题和答案

第1题：

A network administrator needs to configure a router for a Frame Relay connection to a non－Cisco router. Which of the following commands will prepare the WAN interface for this connection?()

A. Router(config-if)# encapsulation frame-relay q933a

B. Router(config-if)# encapsulation frame-relay ansi

C. Router(config-if)# encapsulation frame-relay ietf

D. Router(config-if)# encapsulation frame-relay isl

E. None of the above


参考答案：C

第2题：

When should traffic shaping be implemented on Frame Relay PVCs？（）

  • A、When you want to drop excess traffic above the CIR
  • B、When there is a speed mismatch between the central site and the remote site
  • C、When using Frame Relay SVCs
  • D、When over-subscribing the central site link
  • E、When LLQ is implemented on the Frame Relay PVC
  • F、When Multilink PPP LFI is implemented on the Frame Relay PVC

正确答案:B,D

第3题：

Router R1 connects to a Frame Relay cloud using a multipoint subinterface, with ten PVCs associated with the subinterface.What command would make this router not use a DR, and dynamically discover OSPF neighbors?（）

A. ip ospf network broadcast

B. ip ospf network non - broadcast

C. ip ospf network point - to - multipoint

D. ip ospf network point - to - multipoint non - broadcast


参考答案：C

第4题：

Which of the following is true concerning Frame Relay multipoint subinterfaces?（）

  • A、An IP address is required on the physical interface of the central router.
  • B、All routers are required to be fully meshed.
  • C、All routers must be in the same subnet to forward routing updates and broadcasts.
  • D、Multipoint is the default configuration for Frame Relay subinterfaces.

正确答案:C

第5题：

Which statement about Frame Relay is not true？（）

  • A、Static mapping is used when the remote router does not support Inverse ARP.
  • B、Frame Relay Inverse ARP requires LMI capability to construct an address to the DLCI mapping tableon the router.
  • C、Frame Relay Inverse ARP is disabled by default in Cisco IOS Software for all protocols that areenabled on the physical interface.
  • D、Inverse ARP does not work when LMI is disabled.
  • E、Frame Relay provides forward and backward congestion notification messages

正确答案:C

第6题：

When configuring Frame Relay using point－to－point subinterfaces, which of the following must not be configured?()

A. The local DLCI on each subinterface of the Frame Relay.

B. The Frame Relay encapsulation on the physical interface.

C. An IP address on the physical interface.

D. The subinterface type as point-to-point


参考答案：C

第7题：

Which of the following Frame-Relay encapsulation commands would you use, if you had to connect your Cisco router to a non-Cisco router?（）

  • A、TestKRouter(config-if)# Encapsulation frame-relay dot1q
  • B、TestKRouter(config-if)# Encapsulation frame-relay aal5snap
  • C、TestKRouter(config-if)# Encapsulation frame-relay ietf
  • D、TestKRouter(config-if)# Encapsulation frame-relay isl
  • E、None of the above

正确答案:C

第8题：

Refer to the exhibit. What must be done on router RTA to ensure that EIGRP works effectively in a Frame Relay multipoint environment?()

A. Issue the command bandwidth 224 on the physical interface.

B. Issue the command bandwidth 56 on the physical interface.

C. Issue the command bandwidth 224 on each subinterface.

D. Issue the command bandwidth 56 on each subinterface.


参考答案：A

第9题：

A network administrator needs to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface for this connection?（）

  • A、Router(config-if)# encapsulation frame-relay q933a
  • B、Router(config-if)# encapsulation frame-relay ansi
  • C、Router(config-if)# encapsulation frame-relay ietf
  • D、Router(config-if)# encapsulation frame-relay isl
  • E、None of the above

正确答案:C

第10题：

When configuring Frame Relay using point-to-point subinterfaces, which of the following must not be configured?（）

  • A、The local DLCI on each subinterface of the Frame Relay.
  • B、The Frame Relay encapsulation on the physical interface.
  • C、An IP address on the physical interface.
  • D、The subinterface type as point-to-point

正确答案:C

更多相关问题
相关内容