A customer has two locations that host their pSeries servers

第1题：

A customer has provided the pSeries technical specialist with details of an HACMP solution that they would like validated.  The solution is for two POWER4+ p630 servers directly attached to a FAStT600 storage server as the shared storage.  Each system has the following： ？ 2 integrated network ports ？   2 fibre channel adapter cards   ？ 1 power supply and redundant cooling   ？ HACMP v5.1   In addition to a second power supply， what further requirements， if any， are needed to validate this solution and ensure no single point of failure？ （）

• A、One fibre channel switch
• B、Two fibre channel switches
• C、Two Ethernet cards
• D、Nothing

第2题：

The customer has recently installed a pSeries p5-570 with EMC attached disk storage.  After installation， the customer complained that the disk access appeared to be too slow.  How should the pSeries technical specialist best assist the customer？（）

• A、Recommend the customer call EMC.
• B、Recommend the customer call IBM hardware support.
• C、Recommend the customer contact SupportLine.
• D、Recommend the customer re-creates the volume groups.

第3题：

第4题：

A customer is planning to upgrade two VMware ESX servers from 3.5 to 4.1 after recently installing a new XIV Storage System. Each server has 4 HBAs connected to redundant fabrics for a total of 4 paths per server to storage. The customer wants to increase the throughput available to the ESX servers. What configuration setting does the storage specialist need to highlight?（）

• A、increase the buffer credits on the HBAs
• B、increase the number of device logins on the ESX servers
• C、additional paths will be required between the servers and storage
• D、multipath option on the ESX servers should be changed to round-robin

第5题：

A customer plans to install ten Microsoft Windows servers, three Linux servers, and five AIX servers, with two Fibre Channel host bus adapters each as part of an IBM DS8700 implementation. What multipathing driver is required to build a redundant solution?（）

• A、RDAC
• B、MPIO
• C、SSPC
• D、SDDPCM

第6题：

A customer has ordered a rack， a p650， two p630s， and two p615s.  During a conversation on installation planning， the pSeries technical specialist recognizes that the customer expects the rack to arrive as one unit.  However， the specialist knows that the p650 will be racked， but the other systems will arrive separately.  In fact， the other systems are CSU （Customer Set Up）. Why should the specialist immediately inform the customer that additional racking is the customer’s responsibility？（）

• A、Because additional systems would require more power receptacles
• B、Because the customer may need to do additional facilities planning
• C、Because the customer needs additional funding to cover the services
• D、Because postponing the eventual discussion will likely lead to customer dissatisfaction

第7题：

An existing IBM customer has a few pSeries servers running DB2 on AIX in their environment.  The DB2 application contains the database for an order entry application.  An xSeries SQL database server replicating from DB2 is added for off-line analysis purposes.  The customer wants to know if consolidating the storage and centralized backup is possible. What are the options available to accomplish this？（）

• A、pSeries and xSeries use different file systems. Consolidating Storage and backup is not achievable.
• B、Consolidation is possible by connecting pSeries local storage to the xSeries SQL server using the IXA adapter.
• C、Storage consolidation can be achieved by connecting the pSeries and xSeries servers to a common DS4000 storage server.
• D、Storage consolidation is only achievable when raw file systems are used by the databases and both servers run the same Linux file system （e.g.， EXT3 or Reiser）.

第8题：

第9题：

A customer is ordering a new p650 server to be placed into an existing OEM 42U 19-inch rack containing only two p630 servers.  This is the first p650 in the enterprise.  What is the most important question that the pSeries technical specialist should ask the customer before the order is placed？（）

• A、Have the PDU requirements been met？
• B、Are there sufficient KVM connections？
• C、Is there sufficient service clearance？
• D、Is there sufficient space in the existing rack？

第10题：

A customer is consolidating their ten rack mount Windows servers into a VMware environment with four servers. The existing servers all have internal disk. The total amount of useable capacity is 5TB which is expected to increase to 10TB over the life of this asset. The customer will want to use the advanced features of VMware like VMotion.The customer is concerned about cost. Which of the following meets the customers needs? （）

• A、DS3500 with SAS Host Connection 
• B、DS3500 with iSCSI Host Connection 
• C、DS3500 with FC Host Connection 
• D、DS5020