A new VLAN needs to be created for an existing network. Whic

题目
多选题
A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?()
A

The VLAN must be created

B

The VLAN must be named

C

An IP address and subnet mask must be configured for the new VLAN

D

The desired ports must be added to the new VLAN

E

The VLAN must be added to the existing VTP Domain

如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

You need to create a new VLAN on your Catalyst switch. This VLAN is to be named EZONEXAM. Which of the following need to be completed for the creation of this new VLAN? (Select all that apply)

A. The EZONEXAM VLAN must be created.

B. The desired ports must be added to the new EZONEXAM VLAN.

C. The EZONEXAM VLAN must be added to all of the domains.

D. The EZONEXAM VLAN must be named.

E. An IP address must be configured for the EZONEXAM VLAN.

F. None of the above. VLAN creations are automatic.


正确答案:ABD
A,B,D 解析:Explanation:
Creating a VLAN is done in 3 steps:
1. Create the VLAN
2. Name the VLAN
3. Assign ports to the VLAN

From there, other features and functionality can be configured, but these are the only steps that are required for the addition of a VLAN.

Incorrect Answers:
C. The VLAN needs only to be added to a single switch, where it can act as a stand-alone VLAN, or it can be transferred to other switches in the network through the use of the VTP protocol.

E. VLANs operate at layer 2, and although many are configured with a layer 3 IP address, it is not absolutely necessary to do this.

第2题:

A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?()

A. The VLAN must be created

B. The VLAN must be named

C. An IP address and subnet mask must be configured for the new VLAN

D. The desired ports must be added to the new VLAN

E. The VLAN must be added to the existing VTP Domain


参考答案:A, B, D

第3题:

A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?

A.All defined VLANs are allowed on the trunk by default.

B.Each VLAN, or VLAN range, that is specified with the switchport mode command.

C.Each VLAN, or VLAN range, that is specified with the vtp domain command.

D.Each VLAN, or VLAN range, that is specified with the vlan database command.

E.None of the above


正确答案:A
解析:Explanation:
The question does not state that there are multiple VTP Domains meaning that all defined VLANs are allowed on the trunk until a vtp domain command is issued.

第4题:

A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing departmental traffic. What is the effect of adding switch ports to a new VLAN on the switch?()

  • A、More collision domains will be created.
  • B、IP address utilization will be more efficient.
  • C、More bandwidth will be required than was needed previously.
  • D、An additional broadcast domain will be created.

正确答案:D

第5题:

You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?()

  • A、STP
  • B、GVRP
  • C、SNMP
  • D、VTP
  • E、DHCP

正确答案:D

第6题:

Mike, a technician, is replacing a wireless router on an existing small office home office (SOHO) network. The SSID, WPA and DHCP information has been correctly added. Which of the following must also be addressed?()

A. The administrative password needs to be changed.

B. The TKIP option needs to be enabled.

C. The WEP key needs to be changed.

D. Wireless access points need to be added.


参考答案:A

第7题:

A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()

A. All defined VLANs are allowed on the trunk by default.

B. Each VLAN, or VLAN range, that is specified with the switchport mode command.

C. Each VLAN, or VLAN range, that is specified with the vtp domain command.

D. Each VLAN, or VLAN range, that is specified with the vlan database command.


参考答案:C

第8题:

You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.

You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.

What should you do?

A.On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.

B.On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.

C.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.

D.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.


正确答案:A
解析:Explanation:ToinstallaWindows2000computerasadomaincontrollerinaWindowsNT4.0domain,wemustfirstinstallWindowsNT4.0thecomputerasaBDCintheWindowsNT4.0domainandthenpromotetheBDCtoPDC.WemustthenupgradethemachinetoWindows2000Server.WhenupgradingthedomaincontrollersinaWindowsNTdomaintoWindows2000,wemustupgradetheprimarydomaincontrollerfirst.Incorrectanswers:B:ThecomputermustbeinstalledasBDCandthenlaterpromotedtoPDC.C:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.D:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.

第9题:

You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?()

  • A、Router# copy tftp flash
  • B、Router# copy flash run
  • C、Router(config)# restore flash
  • D、Router(config)# repair flash
  • E、Router#copy flash tftp
  • F、Router# copy start flash

正确答案:A

第10题:

A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?()

  • A、The VLAN must be created
  • B、The VLAN must be named
  • C、An IP address and subnet mask must be configured for the new VLAN
  • D、The desired ports must be added to the new VLAN
  • E、The VLAN must be added to the existing VTP Domain

正确答案:A,B,D

更多相关问题