Company.com has an EMC disk array and would like to connect 

题目
单选题
Company.com has an EMC disk array and would like to connect it to a Virtual I/O Server on a pSeries p5-520.  How can the EMC device drivers be installed?()
A

Use smitty install on the client partitions.

B

Use padmin command in the VIO Server.

C

Use the oem_setup_env environment in the VIO Server.

D

Use cfgmgr to detect/configure the devices within the client AIX partition.

如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

Company.com has recently received a new p5-570 in the data center and intends to Micro-Partition the server. In which order should installation steps be taken?()

  • A、Connect to the network,power on the server,Micro-Partition the server
  • B、Connect to the HMC,power on the server,Micro-Partition the server,connect to the network
  • C、Power on server,connect to the network,Micro-Partition the server,connect to the HMC
  • D、Power on the server,connect to the HMC,Micro-Partition the server,connect to the network

正确答案:B

第2题:

The customer has recently installed a pSeries p5-570 with EMC attached disk storage.  After installation, the customer complained that the disk access appeared to be too slow.  How should the pSeries technical specialist best assist the customer?()

  • A、Recommend the customer call EMC.
  • B、Recommend the customer call IBM hardware support.
  • C、Recommend the customer contact SupportLine.
  • D、Recommend the customer re-creates the volume groups.

正确答案:C

第3题:

A server has five hot pluggable SCSI disk drives in a RAID 5 array. The server OS crashed and the server will not boot. The administrator noticed that all of the disk drives have gone offline.Which of the following components would MOST likely have caused the problem?()

A. Memory

B. SCSI backplane

C. SCSI drives

D. Motherboard


参考答案:C

第4题:

A disk drive failed in a RAID 5 array.  After replacing the disk drive, users are still reporting that access to the server is very slow.  Which of the following BEST explains the problem?()

  • A、The array is rebuilding.
  • B、The array must be reconfigured.
  • C、The array is corrupt.
  • D、The disk drive is not compatible.

正确答案:A

第5题:

A server has five hot pluggable SCSI disk drives in a RAID 5 array.  The server OS crashed and the server will not boot.  The administrator noticed that all of the disk drives have gone offline.Which of the following components would MOST likely have caused the problem?()

  • A、Memory
  • B、SCSI backplane
  • C、SCSI drives
  • D、Motherboard

正确答案:B

第6题:

A customer has an EMC Symmetrix DMX3000 that is at the end of lease. The environment consists of IBM System p, IBM System i, and IBM System z. The customer is evaluating EMC,   HDS, and IBM storage as possible replacements. They are interested in comparing the performance of all three disk subsystems.  Which tool compares performance()

  • A、Capacity Magic
  • B、eConfig
  • C、TPC for Disk
  • D、Disk Magic

正确答案:D

第7题:

TestKing has 25 computers and decides to connect the network to the Internet.TestKing would like for all of the computers to have access to the Internet at the same time, but TestKing only has four usable publicly routable IP addresses.What should be configured on the router so that all computers can connect to the Internet simultaneously?()

  • A、Static NAT
  • B、Global NAT
  • C、Dynamic NAT
  • D、Static NAT with ACLs
  • E、Dynamic NAT with overload

正确答案:E

第8题:

TestKing has 25 computers and decides to connect the network to the Internet.TestKing would like for all of the computers to have access to the Internet at the same time, but TestKing only has four usable publicly routable IP addresses.What should be configured on the router so that all computers can connect to the Internet simultaneously?()

A. Static NAT

B. Global NAT

C. Dynamic NAT

D. Static NAT with ACLs

E. Dynamic NAT with overload


参考答案:E

第9题:

A server has had a drive fail in its storage RAID set.  The administrator swaps the drive with a replacement and the RAID set does not automatically start to rebuild the replaced drive.  Which ofthe following utilities would MOST likely be used to initialize the rebuilding of the replace mentdrive?()

  • A、Net use
  • B、Array management
  • C、Fdisk
  • D、Disk Management Plug-in

正确答案:B

第10题:

A technician would like to ensure that when users connect to a web server in a server farm, they connect to the server with the lowest CPU utilization. Which of the following technologies would accomplish this?()

  • A、Load balancing
  • B、High availability
  • C、Virtual machine
  • D、Reverse proxy

正确答案:A

更多相关问题