Which two statements are correct when you use the reject par

第1题：

第2题：

Which two statements about configuration an unconnected Catalyst Express 500 switch from setup mode using a PC are true？（）

• A、You may use Cisco Network Assistant to set up the initial configuration
• B、You must use CLI for initial configuration
• C、You may use either CLI or CAN for configuration
• D、You may make a direct connection to the PC from any point on the switch
• E、You may only make a direct connection from the port with the flashing green LED to the PC

第3题：

第4题：

Which two statements are true about the relationship between static NAT and proxy ARP? （）(Choose two.)

• A、It is necessary to forward ARP requests to remote hosts.
• B、It is necessary when translated traffic belongs to the same subnet as the ingress interface.
• C、It is not automatic and you must configure it.
• D、It is enabled by default and you do not need to configure it.

第5题：

Which two statements are correct when you use the reject parameter as the next-hop value for a static route?（）

• A、The packet is dropped and the packet's source is marked with the no-readvertise parameter.
• B、The system sends the packet back to the source.
• C、The packet is dropped from the network.
• D、The system sends an ICMP message back to the source of the packet.

第6题：

Which of the following answer choices are correct characteristics of named access list?（）

• A、You can delete individual statements in a named access list
• B、Named access lists require a numbered range from 1000 to 1099.
• C、Named access lists must be specified as standard or extended.
• D、You can use the ip access-list command to create named access lists.
• E、You cannot delete individual statements in a named access list.
• F、You can use the ip name-group command to apply named access lists.

第7题：

In which two situations should you run the command sync group?（） (Choose two.)

• A、when you enable Unified Failover
• B、when you create an ActiveN group
• C、when you synchronize the sticky table
• D、when you require synchronization of the 3G Cache objects

第8题：

第9题：

If you want to use the Java EE platform’s built-in type of authentication that uses a custom HTML page for authentication. Which two statements are true？（）

• A、Your deployment descriptor will need to contain this tag： CUSTOM.
• B、The related custom HTML login page must be named loginPage.html.
• C、When you use this type of authentication， SSL is turned on automatically.
• D、You must have a tag in your deployment descriptor that allows you to point to both a login HTML pageand an HTML page for handling any login errors.
• E、In the HTML related to authentication for this application， you must use predefined variable names fort he variables that store the user and password values.

第10题：

To troubleshoot interface problems, you can use both the disable command and the deactivate command. Which two statements are correct?（）

• A、If the interface is disabled, the logical unit will administratively shutdown.
• B、If the interface is deactivated, the physical interface will administratively shutdown.
• C、If the interface is deactivated, the interface configuration is ignored during commit.
• D、If the interface is disabled, the logical unit configuration is ignored during commit.