A client has an existing Logical Partition (LPAR) on a p650 

第1题：

In order to support Live Partition Mobility (LPM) for a given LPAR between two Power servers, which type of backing device should be chosen for the storage devices presented from the VIO server to the LPAR?（）

• A、LUN-backed devices
• B、File-backed devices
• C、Logical volume-backed devices
• D、Network Filesystem-backed （NFS） devices

第2题：

A client has tried to update the firmware of an Ethernet adapter on a p5 590, however it repeatedly fails. What is the most likely cause of this problem?（）

• A、The adapter must be taken offline prior to the firmware update
• B、The adapter must be assigned to the service partition prior to the firmware update
• C、The system has not been rebooted since the adapter was added to the Logical Partition
• D、The adapter must be dynamically removed from the Logical Partition prior to the firmware update

第3题：

A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）

• A、DLPAR functions are not available for cloned partitions
• B、The new partition has the same node number as the original LPAR
• C、Additional filesets need to be reinstalled after the alt_disk_install cloning
• D、The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured

第4题：

A customer with p615， p630 and p650 pSeries servers installed and running AIX is considering Linux as an additional environment. Which Linux capabilities can the pSeries Sales Specialist present as choices that are available to enhance the existing systems？（）

• A、Linux will be restricted to the p650 system， as it is not supported on the p630.
• B、The customer can run Linux on all the existing systems with or without the presence of AIX.
• C、Linux can run in LPARs on the existing systems but Linux will require the presence of AIX in at least one LPAR.
• D、Linux can be installed on all existing systems but will require the AIX Linux Affinity libraries to boot the systems and run Linux.

第5题：

A pSeries technical specialist is designing a p5-550 LPAR solution which will contain four logical partitions.  Which tool should be used to ensure adherence to all partition rules？（）

• A、LVT
• B、eSAR
• C、eConfig
• D、PCRS6000

第6题：

A customer has an entry level Power System that is currently partitioned and managed by a Hardware Management Console （HMC）. For operational reasons， it must be disconnected from the HMC and configured as a new development system.  How should the customer proceed to implement PowerVM Express and Integrated Virtualization Manager （IVM） on this Power System？ （）

• A、 Install a VIO server as an additional partition and DLPAR the resources from the existing partition to the VIO server.
• B、 Create a service partition and install a VIO server. This will automatically move resources to the VIO server on reboot of the managed system.
• C、 Delete all the existing LPARs， create a new LPAR and assign all the system resources to this LPAR and then install the VIO server on this LPAR.
• D、 Reset the machine to Manufacturing Default Configuration and install the VIO server on the resulting partition created， which will own all system resources.

第7题：

Companycom has purchased a p5 590 with 16 CPUs. To run Simultaneous Multi-Threading (SMT) with a 4-way virtual processor partition with 2.0 processing units of entitlement, how many logical CPUs will be allocated?（）

• A、8-way logical CPU partition, where each logical CPU has the power of 25% of a logical processor 
• B、4-way logical CPU partition, where each logical CPU has the power of 50% of a physical processor 
• C、8-way logical CPU partition, where each logical CPU has the power of 25% of a physical processor 
• D、16-way logical CPU partition, where each logical CPU has the power of 25% of a physical processor

第8题：

An administrator has set up three partitions using a shared processor pool with 2 processors and SMT turned on. The partitions are activated in the following sequence: Partition one: Min = 0.5, max = 3.0, desired = 1.0; Partition two: Min = 1.0, max = 3.0, desired = 1.5 Partition three: Min = 1, max = 0.5, desired = 2. What is the outcome?（）

• A、Partition one starts and has 3.0 logical processors. Partition two does not start. Partition three has 1.0 logical processors. 
• B、Partition one starts and has 1.5 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 processors. 
• C、Partition one starts and has 2.0 logical processors. Partition two start and has 2.0 logical processors. Partition three does not start. 
• D、Partition one starts and has 2.0 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 logical processors.

第9题：

A system administrator for a business recovery service center needs to test disaster recovery strategies for their clients running Linux. Each client has a different system configuration. Each time a client comes in, the system configuration of the managed system must change. What is the best way to handle this using LPAR?（）

• A、Create a system profile. Reconfigure the managed system by activating and deactivating the system profiles. 
• B、Create one partition profile for each client. Reconfigure the managed system by activating the partition profiles for that client. 
• C、Dynamically move processors and memory as needed into each logical partition. Reconfigure the managed system by activating and deactivating partition profiles. 
• D、Dynamically move processors and memory into each logical partition on the server if additional resources are needed. Reconfigure the managed system by activating and deactivating the system profiles.

第10题：

An administrator is creating a new logical partition (LPAR) with 6 virtual processors and 4 processing units. This LPAR must have the highest priority in the shared processor pool. Which weight should be assigned to this LPAR?（）

• A、 0
• B、 1
• C、 255
• D、 256