在路由配置命令中,去除RIP协议的命令是()
第1题:
A.Router(config-router)#show route ip
B.Router(config)#show ip rip
C.Router#show ip rip route
D.Router#show ip route
第2题:
在全局配置模式下,使用——命令配置静态路由。
A.no ip route
B.router rip
C.router ospf
D.ip route
第3题:
在Cisco路由器上配置RIPvl路由协议,参与RIP路由的网络地址有193.22.56.0/26、
193.22.56.64/26、193.22.56.128/26和193.22.56.192/26,正确的配置命令是( )。
A) Router(config)# netword 193.22.56.0 0.0.0.255
B) Router(config-router)# netword 193.22.56.0 255.255.255.0
C) Router(config)# netword 193.22.56.0
D) Router(config-router)# netword 193.22.56.0
第4题:
对路由器A配置RIP协议,并在接口S0(IP地址为172.16.0.1/24)所在网段使能RIP路由协议,在配置模式下使用的第一条命令是(59)。
A.router rip
B.ip routing
C.rip 10.0.0.0
D.network 172.16.0.0
第5题:
Router(config-line)
在全局配置模式下,进入RIP路由协议配置模式的方法和提示符是( )。
第6题:
下列对RIP的配置中,合法的命令是()
A.router rip 100 network 10.12.0.0
B.router rip 100 network 10.0.0.0
C.router rip network 10.12.0.0
D.router rip 100 network 10.0.0.0
第7题:
在Cisco路由器上配置RIPv1路由协议,参与RIP路由的网络地址有193.22.56.0/26、193.22.56.64/26、193.22.56.128/26和193.22.56.192/26,正确的配置命令是______。
A) Router(config)#network 193.22.56.0 0.0.0.255
B) Router(config-router)#network 193.22.56.0 255.255.255.0
C) Router(config)#network 193.22.56.0
D) Router(config-router)#network 193.22.56.0
A.
B.
C.
D.
第8题:
A.Router(config-router)#debug ip rip
B.Router#show ip rip event
C.Router(config-router)#show ip interface
D.Router#debug ip rip
第9题:
Qutidway路由器上输入“show ip rip“命令,如下所示: Qutidway#show ip rip RIP is rurining on Checkcero is on defauit-metric 16 On neighter Fictucrik all BUTO-surttutiry is on preference 100 下列说法正确的是:( )
A、 该条命令显示了RIP当前运行状态和配置信息
B、 默认情况下,RIP路由协议优先级为100,可能通过“IP RIP PRICRITY”命令修改其优先级
C、 这条命令显示路由器所有接口用了RIP协议,最大可达统计数为1G
D、 ON NEIGHBOR显示这台路由器没有作为任何其它路由器的邻居
第10题:
如果想知道配置了哪种路由协议,应使用的命令是( )。
A.router>showrouter protocol B.Router (ciinfig)>show ip protocol C.router (config)>show router protocol D.router >show ip protocol