违法和不良信息举报 联系客服
免费注册 登录

You want to allow your device to

题目

You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）

  • A、[edit security policies from-zone HR to-zone HR]
  • B、[edit security zones functional-zone management protocols]
  • C、[edit security zones protocol-zone HR host-inbound-traffic]
  • D、[edit security zones security-zone HR host-inbound-traffic protocols]
如果没有搜索结果或未解决您的问题，请直接 联系老师 获取答案。
相似问题和答案

第1题：

You are configuring captive portal on your SRX Series device for guest user access.When would you use the redirect－traffic all command?()

A. When you want all unauthenticated traffic to be redirected

B. When you want all clear text traffic to be redirected.

C. When you want all authenticated traffic to be redirected.

D. When you want all encrypted traffic to be redirected.


参考答案：B

第2题：

You want to allow all hosts on interface ge-0/0/0.0 to be able to ping the device’s ge-0/0/0.0 IP address.Where do you configure this functionality？（）

  • A、[edit interfaces]
  • B、[edit security zones]
  • C、[edit system services]
  • D、[edit security interfaces]

正确答案:B

第3题：

When you install a new device in a computer,you have to add the correct device______to the operating system to allow the computer to communicate with the device．

A．application

B．software

C．driver

D．files


正确答案：C
解析：当在计算机上安装一个新的设备时，必须要在操作系统上装一个正确的设备驱动，以使计算机和该设备能够通信。

第4题：

You are the network administrator for ExamSheet.net.  You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）

  • A、Restart the computer in the docking station.
  • B、Run the Add/Remove Hardware wizard.
  • C、Use Device Manager to scan for hardware changes.
  • D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.
  • E、Install the new network adapter driver.

正确答案:B,E

第5题：

You notice that your RMAN script used to copy the datafiles， control files， and archived redo log files is performing very slowly. Which two changes might you want to include in your RMAN script to speed up the COPY commands？（）

  • A、NOCHECKSUM
  • B、MAXCORRUPT
  • C、CHECK LOGICAL
  • D、BACKUP INCREMENTAL
  • E、CONFIGURE DEVICE TYPE ... PARALLELISM

正确答案:D,E

第6题：

You are installing a MAG Series device for access control using an SRX Series device as the firewall enforcer. The MAG Series device resides in the same security zone as users. However, the users reside in different subnets and use the SRX Series device as an IP gateway.Which statement is true?（）

A. You must configure a security policy on the SRX Series device to allow traffic to flow from the user devices to the MAG Series device.

B. No security policy is necessary on the SRX Series device to allow traffic to flow from the user devices to the MAG Series device.

C. You must configure host-inbound traffic on the SRX Series device to allow SSL traffic between the MAG Series device and the user devices.

D. You must configure host-inbound traffic on the SRX Series device to allow EAP traffic between the MAG Series device and the user devices.


参考答案：A

第7题：

You are performing a backup of your database across the network. While taking the backup， you want to save space on the storage media and reduce the network bandwidth. Which command will you issue to configure the required type of backup？（）

  • A、 CONFIGURE DEVICE TYPE TO sbt BACKUP TYPE TO BACKUPSET；
  • B、 CONFIGURE DEVICE TYPE TO disk BACKUP TYPE TO COPY；
  • C、 CONFIGURE DEVICE TYPE TO sbt BACKUP TYPE TO COMPRESSED BACKUPSET；
  • D、 CONFIGURE DEVICE TYPE TO sbt BACKUP TYPE TO COMPRESSED COPY；

正确答案:C

第8题：

You are the administrator of Ezonexam.com's network.

You want to connect your Windows 2000 Professional computer to a new TCP/IP based laser print device. The print device is Plug and Play compliant and is included on the current Hardware Compatibility List (HCL). When you attempt to create a new TCP/IP printer port you receive the following error message:

"Specified Port cannot be added. The port already exists."

You want to be able to use the new TCP/IP printer.

What should you do?

A．Modify the properties of the existing printer port to use the new print device.

B．Change the LPT port setting to bidirectional in the BIOS on your computer.

C．Change the LPT port setting to enable legacy Plug and Play detection on your computer.

D．Obtain and install the WDM-compliant device drivers and printing software for the printer.


正确答案：A
解析：Explanation: The error message states that the new port cannot be added since it already exists. Thus all that is necessary to enable you to make use of the printer is to modify the properties of the existing port.

Incorrect answers:
B: Changing the port setting to bidirectional is not going to enable printing with the new print device.
The problem stems from the new port that cannot be added.

C: Since the print device is plug and play compliant and is included on the HCL, changing the port setting is not going to allow you to use the new TCP/IP printer because the problem stems from a port that cannot be added.

D: For hardware support Windows 2000 Professional includes the Win32 Driver Model (WDM). This provides a common model for device drivers across Windows 98 and Windows 2000. Drivers that are written to the WDM will work in both Windows 98 and Windows 2000. Windows 2000 uses a driver-signing process to make sure drivers have been certified to work correctly with the Windows Driver Model (WDM) in Windows 2000. However, the error message states that it is a port that cannot be added since it already exists. It is thus not a driver problem.

第9题：

You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）

  • A、When away from the office use Device Manager to remove the adapter. 
  • B、When away from the office configure the startup properties for the adapter to be automatic. 
  • C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.
  • D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.

正确答案:C

第10题：

You are the administrator of Company's network. You wish to connect your Windows 2000 Professional computer to a new TCP/IP based Plug and Play compliant print device. The print device is included on the current Hardware Compatibility List (HCL) When you attempt to create a new TCP/IP printer port, you receive the following message:   "Specified Port cannot be added. The port already exists."  You want to create a new TCP/IP printer port.  What should you do? （）

  • A、Change the LPT port setting to enable legacy Plug and Play detection on your computer.
  • B、Delete the existing printer port.
  • C、Change the LPT port setting to bidirectional in the BIOS on your computer.
  • D、Obtain and install the WDM-compliant device drivers and printing software for the printer.

正确答案:B

更多相关问题
相关内容