Which three should be documented after upgrading a SCSI RAID controller?()
第1题:
A server consists of two 72GB SCSI drives and four 146GB SCSI drives. All drives are attached to a RAID controller. The system administrator has decided to configure all six drives in a RAID 5 array.How much usable disk space will this array have?()
A.288GB
B.360GB
C.432GB
D.728GB
第2题:
You are the network administrator for Ezonexam.com.
You need to upgrade a computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the installation of the Windows 2000 Server operating system.
During the text portion of the installation, you receive the following error message:
"Stop 0x00000078 Inaccessible_boot_device."
You want to successfully upgrade the computer.
What should you do? (Each answer presents part of the solution. Choose two)
A.Start the computer by using a DOS disk and run FDISK.
B.Update the firmware on the RAID controller.
C.Restart the installation. During the text-mode setup-mode setup, press F6.
D.Restart the installation. During the text-mode setup, create a new partition.
E.Insert a floppy disk containing the OEM SCSI driver and specify the additional driver.
第3题:
You have a print server named Server1 that runs Windows Server 2003 Service Pack (SP2). Server1 isconfigured as shown in the following table.All the hard disks are 136 GB and are connected to a SCSI controller.You need to identify which disk configuration will provide the best performance for printing.Which disk configuration should you implement? ()
A. one RAID-0 volume
B. one RAID-1 volume
C. one RAID-5 volume
D. two RAID-1 volumes
第4题:
A server has six drives of equal size attached to a RAID controller. Which of the following RAID levels would provide the FASTEST performance?()
第5题:
You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive isconnected to a RAID controller. During the installation, you discover that the Windows 7 installation mediadoes not include the files required to install the RAID controller. You need ensure that you can installWindows 7 on the hard disk drive. What should you do?()
第6题:
A. RAID 1 +0
B. RAID 5
C. RAID 0
D. RAID 1
第7题:
An administrator recently installed a known good RAID adapter. During boot up, the administrator is able to access the RAID configuration utility; however, when the administrator checks for the card in the operating system, it does not show up. Which of the following should the administrator do FIRST?()
第8题:
A. RAID 5
B. RAID 1+0
C. RAID 0
D. RAID 1
第9题:
An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem?()
第10题:
Before installing a firmware update on a RAID controller which of the following should be done?()