A customer has installed a new computer on their network. They can print to the printer but the option for duplex printing is not available. All other computers have the option. Which of the following is the cause of the problem?()A、The new computer is pr

题目

A customer has installed a new computer on their network. They can print to the printer but the option for duplex printing is not available. All other computers have the option. Which of the following is the cause of the problem?()

  • A、The new computer is printing to the wrong IP address.
  • B、The new computer is using the wrong protocol.
  • C、The driver port is not setup correctly.
  • D、The option has not been selected on the driver.
如果没有搜索结果或未解决您的问题,请直接 联系老师 获取答案。
相似问题和答案

第1题:

A user reports that a network printer will not print, however, other users are not experiencing any problems. The user has rebooted their computer twice and it is still not printing. Which of the following should the technician check?()

  • A、Run the printer configuration wizard on the desktop.
  • B、Check to see if the network printer is turned on.
  • C、Verify that the printer is connected to the network.
  • D、Check the local print queue for a failed print job.

正确答案:D

第2题:

You are the network administrator for All network servers run Windows Server 2003. A server named PrintTK1 has a print device directly connected to the parallel port. The print device is shared for use by all users. Peter is the IT manager. Peter reports that his documents are often printed after documents submitted by other users. You need to ensure that Peter's documents take precedence over documents submitted for printing by other users. However, if a document is already printing, the printing must not be interrupted. What should you do?()

  • A、Configure the printer permissions to assign the Allow - Take Ownership permission to Peter. Restart the Print Spooler service on PrintTK1.
  • B、Make Peter's user account the owner of the printer. Restart the Print Spooler service on PrintTK1.
  • C、Create a new printer on PrintTK1 and configure it to print to the print device. In the Advanced tab of the new printer properties, select the Print directly to the printer option. Configure Peter's computer to print to the new printer.
  • D、Create a new printer PrintTK1 and configure it to print to the print device. Modify the priority of the new printer. Configure Peter's computer to print to the new printer.

正确答案:D

第3题:

You are the administrator of your company's network. A user named Lilly prints dozens of documents daily from her Windows 2000 Professional computer. Lilly reports that she receives a dialog box announcing that each print job she sends has printed successfully.

Lilly's default printer is a shared printer that is connected to Windows 2000 Server computer. She wants to have this notification turned off because she prints so many documents.

What should you do?

A.In the server properties of the printer system folder, clear the Notify when remote documents are printed option.

B.In the server properties of the printers system folder, clear the Notify computer, not user, when remote documents are printed option.

C.In the default printer properties, select the Portstab, and clear the Enable bidirectional support option.

D.In the default printer properties, select the Advancedtab, and clear the Advanced printing features option.


正确答案:A
解析:Explanation:Toturnoffthenotificationthataprintjobhasprintedsuccessfullyyoumustclearthe"Notifywhenremotedocumentsareprinted"optionontheAdvancedtabofthePrintSeverproperties.ThePrintServerpropertiescanbeaccessedviatheFilemenuinthePrintersfolder.Incorrectanswers:B:Thisoptionspecifieswhetherthenotificationshouldbesenttothecomputerortheuser.Byclearingthissettingthenotificationwillbesenttotheuser.Youdonotwantthisnotificationtobesent.Thereforeyoushouldclearthe"Notifywhenremotedocumentsareprinted"option.C:Disablingthebidirectionalsupportoptionwillpreventtheprintdevicefromcommunicatingwiththeprinterontheserver.Theprinterwillstillbesendingnotificationmessagestousersoftheprinter.Thebidirectionalsupportoptionshouldbeenabledsothattheprintdevicecouldreportprinterproblemssuchlowtoneretc.D:TheadvancedprintingfeaturesoptionconcernsmetafilespoolingandoptionssuchPageOrder,BookletPrinting,andPagesPersheet.Disablingthisoptionwillnotdisablethenotificationofprintjobs.

第4题:

A laser printer is sent for repair and the work order indicates that there is an image printing problem.  Which of the following should a technician do FIRST to confirm this problem?()

  • A、Run the calibration feature on the laser printer.
  • B、Run a self-test image page from the printer.
  • C、Clean the corona wire and return printer.
  • D、Print a test page from a computer.

正确答案:B

第5题:

A user reports that while printing a large document,the local printer fails to print and the document cannot be deleted from the queue. What is the MOST likely cause of the problem?()

  • A、The printer cable is not bi-directional.
  • B、The user does not have full printer administration rights.
  • C、The computer cannot spool and send the print job fast enough.
  • D、The print job is too big for the amount of available memory.

正确答案:D

第6题:

A technician receives a new printer for repair and the work order states that when powered on theprinter makes a loud noise and will not print. Which of the following actions should the technician take? ()

  • A、Install new drivers on the computer.
  • B、Install a new ink cartridge.
  • C、Install a print head on the printer.
  • D、Remove the packing tape from the print head.

正确答案:D

第7题:

A technician receives a new printer for repair and the work order states that when powered on the printer makes a loud noise and will not print.  Which of the following actions should the technician take? ()

  • A、Install new drivers on the computer.
  • B、Install a new ink cartridge.
  • C、Install a print head on the printer.
  • D、Remove the packing tape from the print head.

正确答案:D

第8题:

You are the network administrator of a small Windows 2000 Active Directory domain Ezonexam.com.

The domain contains one shared print device with default settings. An employee named Tess frequently prints high-priority documents that she needs to have immediately.

Tess reports missing critical deadlines because of the large number of print jobs ahead of hers in the queue.

You need to ensure that Tess's print jobs are always the next to be printed, regardless of the number of other jobs waiting in the print queue.

Which action or actions should you take to achieve this goal? (Choose all that reply)

A. Create a new printer on the print server that points to the same print device.

B. Create another print port on the print server that points to the same print device.

C. In the properties of the new printer, click the Advanced tab and change the priority to 10.

D. In the properties of the new printer, change the priority to 1.

E. . In the properties of the original printer, click the Advanced tab and change the priority to 10.

F. Configure Tess's computer to use the new printer.

G. Configure the Internet Printing Protocol (IPP) Client on Barbara's computer.


正确答案:ACF
A,C,F 解析:Explanation: To answer this, we need to understand the difference between a printer and a print device. A print device is the hardware device that spits out the paper. A printer is a software interface that sends print jobs to the print device. You can have multiple printers sending print jobs to the same print device. In this scenario, we create another printer (A) with a higher priority than the existing printer (C) and configure Lily's computer to use the new printer (F).

Note: The default priority of a printer is 1. When multiple printers are configured to print to the same print device, the print jobs from the printer with the highest priority will be printed first.

Incorrect Answers:
B: The port is used by the print device. We need another printer that sends print jobs to the same port (print device) as the existing printer.

D: The default priority is 1. We need to increase this so the new printer will have a higher priority than the existing printer.

E: This will increase the priority of the existing printer. Therefore, other print jobs will print before Lily's print jobs.

G: IPP is used for connecting to remote printers over the internet. This is not relevant to this scenario.

第9题:

A technician has just installed a new power supply into a desktop computer and now the computer will not turn on. Which of the following is the MOST likely cause?()

  • A、The voltage selector switch on the power supply is set incorrectly.
  • B、The 3.3v power line is connected to the wrong input on the motherboard.
  • C、The new power supply voltage rating is too high.
  • D、The 12v power cord is installed incorrectly.

正确答案:A

第10题:

A technician installed a new wireless access point on an existing small office home office (SOHO) network with a selective security option enabled. All wireless computers connect to the new network except one computer that cannot connect to the wireless network. Which of the following is the cause?()

  • A、The network uses MAC filtering
  • B、The network uses WEP
  • C、The network uses SSID broadcast
  • D、The network uses WPA

正确答案:A

更多相关问题