When adding a 

第1题：

第2题：

第3题：

第4题：

On an existing two-node cluster， the system is configured with RAID5 SSA as the shared disk.  When adding a new node to the cluster， what must be taken into consideration？（）  

• A、 Nothing，SSA can support a maximum of 8 initiators per loop.
• B、 The RAID5 implementation on SSA will only support two initiators per loop.
• C、 SSA can only support four initiators per lop when using the fat write option.
• D、 The RAID implementation can be used with three initiators only if the fast write cache option is used on all adapters.

第5题：

When is it necessary for a TDA to be conducted on an installed IBM DS8800? （）

• A、when installing SSD drives
• B、when adding a new workload
• C、when installing SATA drives
• D、when adding more Linux hosts

第6题：

第7题：

将Project窗口中的素材加入Sequence（节目）时，如果素材与节目的大小尺寸不同，如何使其匹配节目尺寸？（）

• A、不用设置，素材会自动匹配节目大小
• B、在Motion设置中改变素材至节目大小
• C、在项目设置中，取消Scale Clips to project dimensions when adding to sequence命令
• D、在项目设置中激活Scale Clips to project dimensions when adding to sequence命令

第8题：

第9题：

When adding a new user and assigning a role, which user role has "read only" rights to theconfiguration and operational states? （）

• A、user
• B、read_only
• C、target_operator
• D、security_operator

第10题：

Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）

• A、By adding all subnets listed by the show ip route connected command
• B、By adding the subnets of working interfaces over which static neighbors have been defined
• C、By adding subnets redistributed on the local router from another routing source
• D、By adding all subnets listed by the show ip route static command