Assume the scoped attribute priority does NOT yet exist. Which two create and set a new request-scopedattribute priority to the value "medium"？（）A、${priority = ’medium’}B、${requestScope[’priority’] = ’medium’}C、c：set var="priority" value="medium" /D、c：set

第1题：

第2题：

第3题：

第4题：

What is the WMM user priority of the packets going downstream to the client when the client does not support TSPEC but the Cisco WLC has ACM enabled and WLAN priority is set to Platinum?（）

• A、background
• B、best effort
• C、voice
• D、video

第5题：

Which statement is correct for both the LWAPP and CAPWAP AP upstream 802.1Q tagged wired QoS priority for a non-WMM-associated client frame that is H-REAP locally switched running v5.2?（）

• A、Wireless client WMM UP classification is translated to a wired DSCP priority.
• B、Wireless client 802.11p classification is translated to a wired DSCP priority.
• C、Wireless client WMM UP classification is translated to a wired 802.1p CoS priority.
• D、Wireless client 802.11p classification is translated to a wired 802.1p CoS priority.
• E、WLAN configured QoS level is used to set the wired DSCP priority.
• F、Wired 802.1p CoS priority is not set.

第6题：

第7题：

What is the protocol of following described： there are 4 priority queues：high，medium，normal.low the high and medium queue have precedence over the default queue the classifcation is configuration via the command ‘priority-list’ the default queue is the normal queue.

第8题：

第9题：

What are two things that an access point （AP） does when it receives an 802.11 frame from a Wi-Fi Multimedia （WMM） client？ （）

• A、EAP-FASTEAP-FAS Access Point Protocol （LWAPP） packet is used to generate an 802.1 p priority value in the packets， which are sent to an Ethernet switch by the controllers.
• B、The AP will police the 802.1 le priority value to ensure it does not exceed the maximum value allowed for the QoS policy that is assigned to that client.
• C、Once the LWAPP packet is received， the AP generates the IEEE 802.1 p priority value.
• D、The AP will map the 802.11e priority value to the DSCP value.
• E、The AP will map the DSCP value to the outer LWAPP frame.

第10题：

Each port that is configured to use LACP has an LACP port priority. Which statements are true about LACP port priority？ （）

• A、 Port priority value can be configured between 1 and 65535.
• B、 A higher port priority value means a higher priority of LACP.
• C、 Port priority can be configured so that specific links can be chosen as active links rather than the hot standby links within the port channel.
• D、 LACP uses the port priority with the port number to form the port identifier.
• E、 LACP Port priority default value should always be changed