You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server is configured as a network address translation (NAT) router. The server has two network adapters and provides Internet access for the network.You need to prevent traffic on p

第1题：

You have a server that runs Windows Server 2003 Service Pack 2 （SP2）. The server is configured as a network address translation （NAT） router. The server has two network adapters and provides Internet access for the network. You need to prevent traffic on port 21 from being sent to the Internet. All other outbound traffic must be allowed.  What should you do？（）

• A、On the network adapter that is connected to the LAN， enable TCP/IP filtering.
• B、On the network adapter that is connected to the Internet， enable TCP/IP filtering.
• C、From the Routing and Remote Access snap-in， open the properties of the interface connected to the Internet， select the Services and Ports tab， and define a new service.
• D、From the Routing and Remote Access snap-in， open the properties of the interface connected to the Internet， select the NAT/Basic Firewall tab， and define a new static packet filter.

第2题：

You have a Web server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). You replace the network adapter. Users report that they are unable to access Server1. You need to ensure that users can access Server1. What should you do?（）

• A、From Network Connections, configure the Provider Order settings.
• B、From Network Connections, configure the Adapters and Bindings settings.
• C、From the Local Area Connection properties, configure the Internet Protocol (TCP/IP) settings.
• D、From the Local Area Connection properties, configure the File and Printer Sharing for Microsoft Networks settings.

第3题：

第4题：

You have a server that runs Windows Server 2003 Service Pack 2 （SP2）. The server is configured as a router and provides access to the Internet.  You need to log all connections made to the server. The log must contain the IP address and the port used to establish the connection. What should you do？（）

• A、Install Network Monitor Tools and create a new capture.
• B、Install Connection Manager Administration Kit （CMAK） and create a new profile.
• C、From Performance Logs and Alerts， create a trace log.
• D、From Routing and Remote Access， modify the Remote Access Logging settings.

第5题：

You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server connects to the Internet by using a router.You attempt to ping an Internet host and receive the following error message: “Destination host unreachable.”The server’s routing table is configured as shown in the exhibit. (Click the Exhibit button.) You need to ensure that you can access Internet hosts. What should you do?（）

• A、Modify the subnet mask. 
• B、Modify the default gateway address. 
• C、Clear the Address Resolution Protocol (ARP) cache. 
• D、Stop the Windows Firewall/Internet Connection Sharing (ICS) service.

第6题：

You have a server named Server2 that runs Windows Server 2003 Service Pack 2 (SP2). The server has two network connections named Local Area Connection and Internet Connection.You configure network address translation (NAT) on Server2 as shown in the exhibit. (Click the Exhibit button.) You configure all client computers to use Server2 as their default gateway.Users report that they cannot connect to the Internet. You successfully connect to the Internet from Server2.You need to ensure that client computers can access Internet resources.  What should you do?（）

• A、Change the Internet Connection interface type to Basic firewall only. 
• B、Change the Internet Connection interface type to Private interface connected to private network. 
• C、Add Local Area Connection as a new interface for the NAT protocol and set the interface as a Public interface connected to the Internet. 
• D、Add Local Area Connection as a new interface for the NAT protocol and set the new interface as a Private interface connected to private network.

第7题：

Your network contains a server named Server1 that runs Windows Server 2003 Service Pack (SP2). You install a new network adapter on Server1. You need to view the media access control (MAC) address for the new network adapter. What should you do? （）

• A、At the command prompt, run Ipconfig /all.
• B、At the command prompt, run Net view //server1.
• C、From the Device Manager snap-in, view the properties of the network adapter.
• D、From the Services snap-in, view the properties on the Network Connections service.

第8题：

You have a terminal server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Windows Firewall is disabled on Server1. Server1 has two network adapters named NIC1 and NIC2. Both network adapters are connected to the same network segment. The IP address for NIC1 is 192.168.1.11. The IP address for NIC2 is 192.168.1.12. You regularly connect to Server1 by using Remote Desktop Connection. The NIC1 network adapter fails. You attempt to establish a Remote Desktop connection to 192.168.1.12, but the connection fails. You successfully connect to 192.168.1.12 by using Windows Explorer. You verify that IP filtering is disabled and that no IPSec policies are assigned. You need to ensure that you can establish Remote Desktop connections to Server1. What should you do? （）

• A、From Windows Firewall, enable the Remote Desktop exception.
• B、From Terminal Services Manager, modify the RDP-TCP settings.
• C、From the properties of NIC1, modify Internet Protocol (TCP/IP) settings.
• D、From Windows Explorer, modify the %systemroot%/system32/drivers/etc/services file.

第9题：

Your network consists of a single Active Directory domain and a single subnet. The network is not connected to the Internet. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3).You have a DHCP server named Server1. All client computers receive their IP configurations from Server1. You implement a new server named Server2. You connect Server2 to the internal network and the Internet. You then configure Server2 as a network address translation (NAT) router. From a client computer, you discover that you cannot access any Internet servers. From Server2, you verify that you can access Internet servers and internal servers. You need to ensure that all internal computers can access Internet servers.  What should you do?（） 

• A、On Server2, add a new route. 
• B、On Server1, create a multicast scope. 
• C、On Server1, add the Router scope option. 
• D、On Server2, modify the default gateway address.

第10题：

Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the Remote Access Service role service installed. Server1 is configured as a VPN server.You need to ensure that you can configure Server1 as a Network Address Translation (NAT) server.What should you do first on Server1？（）

• A、Enable IPv4 routing.
• B、Enable IPv6 routing.
• C、Add a new routing protocol.
• D、Add the Routing role service.