You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Ser

题目

You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.

You want to accomplish the following goals:

1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.

2. Existing user environments will be maintained on the Windows 2000 Professional computers.

3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.

4. The RIS image and the upgraded applications will be enabled as they are added to the network.

You take the following actions:

1. Install the RIS image on a Windows 2000 Professional computer named Computer1.

2. Install the upgraded applications on Computers1.

3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.

4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.

5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.

Which result or results do these actions produce? (Choose all that apply.)

A．An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.

B．Existing user environments will be maintained on the Windows 2000 Professional computers.

C．The network name of each Windows 2000 Professional computer will be changed to match its asset tag.

D．The RIS image and the upgraded applications will be enabled as they are added to the network.

如果没有搜索结果或未解决您的问题，请直接联系老师获取答案。

相似问题和答案

第1题：

You are the administrator of your company's network. The network is configured as shown in the exhibit.

You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.

You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.

What should you do?

A．Add a computer running DHCP Relay Agent to the marketing segment.

B．Add a computer running the network monitor driver to the marketing segment.

C．Move the Windows 2000 Server computer running WINS to the marketing segment.

D．Move the Windows 2000 Server computer running Active Directory to the marketing segment.

正确答案：A
解析：Explanation: RIS requires DNS, DHCP, and Active Directory. These services are all present according to the exhibit. The problem is the router which isn't RFC-1542 compliant, i.e. it is not BOOTP compliant, and therefore the DHCP Server will not be reached from the marketing segment. Thus the computers will not be able to contact the RIS server since RIS clients require DHCP to acquire TCP/IP configuration. By adding a DHCP Relay Agent to the marketing segment the computers will be able to connect to the DHCP server, get their TCP/IP configuration, and connect to the RIS server.

Incorrect answers:
B: Network monitor driver is used to monitor network traffic. It cannot solve the problem in this scenario and is thus inappropriate.

C: In addition to a DHCP server, the RIS server requires the presence of a DNS server running Active Directory. As DNS and Active Directory are present in the exhibit, there is no need for the WINS server. Both WINS and DNS with Active Directory are responsible for name resolution. A WINS server is required for compatibility with older versions of Windows and with non-Windows computers.

D: A DHCP server, a DNS server and Active Directory is available on this network. These servers and services are required for RIS. However the RIS server cannot access the DHCP server as the router is not RFC-1542 compliant.

第2题：

You are the administrator for your company's network. The network is configured as shown in the exhibit.

You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.

You create a RIS image. You load the image onto the RIS server. You then start the new computers.

You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.

What should you do?

A．Add a Windows 2000 Server computer running WINS to the network.

B．Add a Windows 2000 Server computer running DHCP to the network.

C．Add the domain Everyone group to the RIS OS image security settings.

D．Place the new computers on the same segment as the RIS server.

正确答案：B
解析：Explanation:RIShasthefollowingrequirements:(1)DNSserver,(2)DHCPserverand(3)ActiveDirectory(Windows2000DomainController)TheexhibitshowsthepresenceofActiveDirectoryandDNS,butalackofaDHCPserver.WemustthereforeaddaDHCPserver.Incorrectanswers:A:RISdoesnotuseWINSatall.RISrequiresDNSfornameresolution.C:ThereshouldbenoneedtomanuallyconfigurefilepermissionsontheRISOSimage.D:MovingthenewcomputersintothesamesegmentwillnotworksincethereisnoDHCPserverpresent.Generally,RISworkswellinnetworkswithsubnets.

第3题：

your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）

A.Install service pack 4 on all windows 2000 professional computers.

B.Upgrade the windows 2000 professional computers to windows XP SP2.

C.Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.

D.Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.

参考答案：B

第4题：

You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically. You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers. What should you do?（）

A、Configure the DHCP scope to add additional IP addresses.
B、Run Rbfg.exe from the RemoteInstall/Admin folder on the RIS server.
C、Modify the startup sequence in the CMOS of the remaining computers.
D、Create computer accounts on the remaining computers in the active directory.

正确答案:A

第5题：

You are the administrator for Ezonexam's network.

Your network includes Windows 2000 Professional client computers, Windows 2000 Server computers, Windows XP Professional computers, and UNIX client computers. Users of the UNIX operating system send print jobs to shared printers on a UNIX computer named PrintServ.

You want to make the shared printers on PrintServ available to the Windows 2000 Professional computers, the Windows 2000 Server computers and the Windows XP Professional computers.

What should you do?

A．Use the SRVANY utility from the Windows NT Resource Kit to run the LPR program as a service.

B．Configure each of the printers to support TCP/IP printing.

C．Create an LPR port on each client that is configured to use PrintServ.

D．Configure each of the printers to use LPR port

正确答案：C
解析：Explanation: When the Print Services have been installed, UNIX clients will be able to connect to any of your printers. In addition, you will be able to add an LPR port on your server to redirect print jobs to an LPD service hosted on a UNIX computer. When installed on this port, a printer will be able to be shared on your server and will appear as any other printer to your Windows clients. All jobs submitted to it will be forwarded to a spooler on the UNIX server. In addition, UNIX clients will be able to connect to the IP address of the Windows 2000 UNIX Print server and then to the specific queue.

Incorrect answers:
A: This will not allow the UNIX clients to make use of the printer.

B: This option presupposes that the printers are TCP/IP capable printers. The disadvantage of this is that you do not get the benefits of Windows 2000 printer security, scheduling, or administration. In order to support the UNIX clients you need to create an LPR port on each client.

D: This is impractical. All that is necessary is to create an LPR port on each client that is configured to use PrintServ.

第6题：

Ezonexam.com's network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.

Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal.

What should you do?

A．Install Simple TCP/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers.

B．Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 2000 Server computer. Configure the UNIX computers to print to these shared printers.

C．Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print to the shared printers.

D．On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer.

正确答案：D
解析：Explanation:WeneedtoenabletheWindows2000ProfessionalclientstoprinttotheprintdevicesattachedtotheUNIXcomputers.ThesimplestwayistocreatesharedprintersonaWindows2000Servercomputer,andconfiguretheWindows2000Professionalclientstoconnecttothesharedprinters.IncorrectAnswers:A:SimpleTCP/IPServicesisnotrelevanttoWindows2000printing.B:ThisanswerishowyoucouldconfigureUNIXclientstousetheprintdevices.WeneedtoenabletheWindows2000Professionalclientstousetheprintdevices.C:ItisnotnecessarytodisconnecttheprintdevicesfromtheUNIXcomputersandconnectthemtotheWindows2000Servercomputer.Therefore,thisisnotthesimplestsolution.

第7题：

You are the administrator of your company's network. Your network has 20 Windows 2000 server computers in the contoso.com domain. Your network also has 250 Windows 98 computers. You want to perform. a clean installation of Windows 2000 Professional on all of the Windows 98 computers. All of the Windows 98 computers are identical models and are PXE complaint.

You want to accomplish the following goals:

1. An unattended installation of Windows 2000 Professional will be performed.

2. An unattended installation of company's standard applications will be performed during the installation of Windows 2000 Professional.

3. Each computer will be assigned a unique security identifier description.

4. The unattended installation script. will be modified so that the computers automatically join the contoso.com domain.

You take the following actions:

1. Install Windows 2000 Professional on a Windows 98 computer named computer1.

2. Install and configure computer standard applications on computer1.

3. Use Setup Manager on computer1 to create an unattended.txt file based on the current configuration including domain membership.

4. Start the remaining Windows 98 computers and then install Windows 2000 Professional. Use the unattended.txt file to provide the setting for the installation.

Which result or results do these actions produce? (Choose all that apply)

A．An unattended installation of Windows 2000 Professional will be performed.

B．An unattended installation of company's standard applications will be performed during the installation of Windows 2000 Professional.

C．Each computer will be assigned a unique security identifier description.

D．The unattended installation script. will be modified so that the computers automatically join the contoso.com domain.

正确答案：AC
解析：Explanation:Thesetupmanagerisusedtocreateanunattend.txtanswerfile.Usingtheanswerfileanunattendedinstallationwillbeperformed.Newsecurityidentifierdescriptions(SIDs)arecreatedbydefaultduringtheinstallationprocess.Incorrectanswers:B:TheSysprep.exeutilityshouldberunaftertheinstallationoftheapplicationssothattheapplicationscanbeincludedintheunattendedinstallation.D:Thecomputerswillnotautomaticallyjointhecontoso.comdomain.YouneedtoprestagecomputeraccountsanduseaUDF(UniquenessDatabaseFile)forthecomputernames.

第8题：

You want to install Windows 2000 Professional on 45 new computers on your company's network. You first install Windows 2000 Professional on one of the new computers.

You log on to the computer by using the local Administrator account. You install Microsoft Office 97, a virus scanner, and other company-standard applications. You then create a RIS image of the computer you configured.

You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network. What should you do?

A．Run Rbfg.exe before installing the standard applications.

B．Run RIPrep.exe before installing the standard applications.

C．Copy the All Users profile to the Default Users profile.

D．Copy the local Administrator account profile to the Default Users profile

正确答案：D
解析：Explanation: By copying the local Administrator account profile to the default users profile, all users will get access to the shortcuts, which were made when the local administrator installed the applications.

Incorrect answers:
A: Rbfg.exe (Remote boot floppy generator) is used to make a remote boot floppy, which is used by non-PXE compliant RIS clients to start the RIS installation process. It is thus not appropriate in this scenario.

B: Riprep.exe should not run prior to installing the applications, as the RIS image must include the installed applications. Therefore riprep.exe must be used after the installation of applications.

C: The all users profile is used by all the users. There is no need to copy it to the default user profile.

第9题：

You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.

What should you do?

A．Configure the DHCP scope to add additional IP addresses.

B．Run Rbfg.exe from the RemoteInstall\Admin folder on the RIS server.

C．Modify the startup sequence in the CMOS of the remaining computers.

D．Create computer accounts on the remaining computers in the Active Directory.

正确答案：A
解析：Explanation: RIS requires Active Directory, DNS and DHCP. The clients can either be PXE-compliant or they can use a Remote boot diskette. In this scenario, the DHCP server has run out of IP-addresses. By extending the scope by 40 IP addresses the installation on the remaining computers will be successful.

Incorrect Answers:
B: Rbfg.exe is used to create Remote Boot disks for computers that do not have PXE-compliant network cards. In this scenario, all clients are PXE-compliant and will thus be able to boot through the network and access the RIS image. It is thus not necessary to create Remote Boot disks.

C: The 50 new computers have identical hardware. There installation worked on 10 of the new computers. There can thus be no incorrect startup sequence setting in CMOS.

D: In this situation there is no need for prestaged computer accounts in Active Directory. Pre-staged computer accounts are used to select between RIS servers. By configuring the RIS server to answer only known client computers it would require user accounts for all RIS clients. This is not the default setting.

第10题：

You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）

A、Configure a DNS suffix.
B、Configure a subnet mask.
C、Configure an LMHOSTS file.
D、Configure an Interface metric.
E、Configure at least one DNS address.

正确答案:B,E

You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Ser

题目

相似问题和答案

更多相关问题

相关内容