A
B
C
D
第1题:
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.
The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.
What should you do?
A.On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.
B.On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
C.Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.
D.Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.
E.Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
第2题:
You perform a clean installation of Microsoft Windows Vista on the first partition. Then, you install Microsoft Windows XP Professional on the second partition of the same machine.You are able to log on to Windows XP Professional but do not have the option to boot to Windows Vista.You need to be able to dual boot the computer.What should you do?()
A.A
B.B
C.C
D.D
第3题:
Your Windows 2000 Server computer named EzonexamSrv contains a single 18-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 2 GB in size and contains the operating system files. Partition D is 16 GB in size and contains user data that is updated frequently.
Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 10:00 P.M.You have a current Emergency Repair Disk (ERD) for EzonexamSrv, and the Recovery Console is installed on the computer.
One day at4:00 P.M., the server fails. You attempt to restart EzonexamSrv, but you receive the following error message:
"Boot disk or operating system not found".
You use Recovery Console to discover that the files on partition C are corrupted.
You need to recover EzonexamSrv from the failure as quickly as possible. You also must recover as much user data as possible.
What should you do?
A.Use the ERD to start the computer. Replace the corrupted files on partition C by copying them from a Windows 2000 Server CD-ROM.
B.Boot the Recovery Console. Copy any files that have changed since 10:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.
C.Start the computer by using a Windows 2000 Server CD-ROM. Select the Repair option in Setup.
D.Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.
第4题:
You are employed as the exchange administrator at Company.com.the Company.com network contains an exchange 2010 organization that contains a single mailbox server named -ex01.Company.com has its headquarters in stockholm where you are located.-ex01 in turn contains two mailbox databases named kingdatabase1 and kingdatabase2.you receive an instruction from the cio to restore a backup of kingdatabase1.to ensure productivity you need to make sure that all examways users can connect to the mailboxes on kingdatabase1 whilst you doing the restore. What should you do?()
第5题:
You want to perform in incomplete recovery of your database. You plan to use these commands to recover your database: SET UNTIL TIME = ’2000-12-09:11:44:00’; RESTORE DATABASE; RECOVER DATABASE; How should the commands be executed? ()
第6题:
You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.
You want to install Windows 2000 Server from source files that are located on a server on the network.
What should you do?
A.Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.
B.Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.
C.On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.
D.On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
第7题:
Your network consists of a single Active Directory domain. All network servers run Windows Server 2003Service Pack 2 (SP2).A server hard disk drive fails. You replace and configure the hard disk drive and use Windows Backup to start a data restore.When you start the restore, you receive the following error message.You need to restore the data on the server. The solution must create the same directory structure that existed beforethe disk failure.What should you do? ()
A. Catalog the backup file.
B. Restore the backup to a single folder.
C. Restore the files to the original location.
D. Restore the backup to an alternate location.
第8题:
You are the administrator of a Windows 2000 Server network. On each server, you format a separate system partition and a separate boot partition as NTFS.
Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message "NTLDR is missing. Press any key to restart".
You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do?
A.Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.
B.Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall. When installation is complete, copy the NTLDR file to the root of the boot volume.
C.Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.
D.Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
第9题:
QUESTION 14 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to installWindows 7 on the computer by using the DVD installation media and receive the following error message:Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need to ensurethat you can install Windows 7 on the computer by using the DVD installation media. What should you do?()
第10题:
You are the network administrator for your domain at TestKing.com. All servers run Windows Server 2003. You manage a server named TestKing7. You create a script named TestKingDataBackup.cmd on TestKing7 that contains Ntbackup commands for 10 separate backup jobs. You use the AT command from your client computer to schedule and run backups on TestKing7. You also use Automated System (ASR) on TestKing7. A user, Tess King, reports that several directories are missing from TestKing7. You establish that you need to restore all 10 backup jobs. You need to restore the data with the least amount of administrative effort. What should you do?()