单选题Companycom wants the application server LPAR to communicate with the database LPAR on a p5 590 without using network adapters. What does the customer need to install?（）A VIO ServerB AIX 5.2 ML4C Shared Ethernet AdapterD AIX 5.3 with Advanced Power Virt

第1题：

Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）

• A、Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS
• B、Use DLPAR to move resources from the test LPAR to training when training is active
• C、Install Partition Load Manager to share resources between the test and training environments
• D、Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs

第2题：

A customer wants to take advantage of IBM’s Micro-Partitioning capabilities for their new AIX applications.   The pSeries technical specialist should recommend purchasing which of the following？（）

• A、p5 hardware， AIX 5.2， Virtual I/O Server
• B、POWER4 hardware， AIX 5.3， Virtual I/O Server，
• C、p5 hardware， AIX 5.3， Advanced POWER Virtualization feature
• D、POWER4 hardware， AIX 5.2， Advanced POWER Virtualization feature

第3题：

Companycom wants to reduce the number of copper, Ethernet adapters on their 4 way p5 570 running AIX 5.3 used in each of the four LPARs. Companycom has one database LPAR, two application LPARs, and one web LPAR. Only the Web LPAR needs to communicate with the outside world. What is the minimum number of Ethernet adapters that should be provided to ensure redundancy and no single point of failure?（）

• A、One single port Ethernet adapter
• B、Four dual port Ethernet adapters
• C、Two single port Ethernet adapters
• D、Eight single port Ethernet adapters

第4题：

A client has an existing Logical Partition (LPAR) on a p650 running AIX 5.2 and will be porting this LPAR to a p5 590. A mksysb has been run to tape, and a compatible tape drive is available and allocated to the target LPAR on the p5 590. What additional resource needs to be available on the p5 590?（）

• A、A CD or DVD with installation media
• B、An internal SCSI adapter in the target LPAR
• C、An Ethernet adapter for access to an FTP server
• D、Advanced Power Virtualization feature of the p5 590

第5题：

Companycom has a p690 server with unused fiber (HBA) host bus adapters (feature code 6228) that they would like to reuse. They are interested in implementing Advanced Power Virtualization features particularly Virtual IO. What is the best way to proceed?（）

• A、Upgrade the p690 to a p5 590 server running AIX 5.3
• B、Upgrade the p690 server to AIX 5.3 and implement Advanced Power Virtualization
• C、Purchase a p5 590 with minimum resources and simply reuse the p690 unused fiber HBA adapters
• D、Purchase a p5 590 that has all the needed resources and adapters for Advanced Power Virtualization

第6题：

A p5 570 customer is currently running AIX 5.3. The customer now wants to add Virtual Ethernet to two of the LPARs. This will enable the application tier can communicate to the database tier without using an external Ethernet card. What is the best way to accomplish this task?（）

• A、Create a VIO server
• B、Modify the LPAR profiles to add a Virtual Ethernet adapter
• C、Buy the Advanced Power Virtualization feature and enter a authorization code at the HMC
• D、Buy the Advanced Power Virtualization feature and enter a authorization code at the service  processor menu

第7题：

Companycom is migrating their application that was built on AIX 4.3, to a new p5 590 system that is running AIX 5.3. The application was a 32-bit program. What will need to be done with the application to allow it to run on the new system?（）

• A、Run without recompiling on AIX 5.3
• B、Relink to the 32-bit kernel in order to run the application
• C、Recompile to run on AIX 5.3 because the libraries are in different locations
• D、Recompile 32-bit applications because the compiler flags and versions have changed

第8题：

Companycom has a p5 590 that has their production LPAR, their Tivoli Storage Manager (TSM) LPAR, and several other LPARs. What method would provide connectivity between the production LPAR, and the TSM LPAR, but be isolated from the other LPARs in the system without utilizing a Virtual IO Server or physical adapter resources?（）

• A、Use shared memory and semaphores to transfer the data to the TSM LPAR
• B、Provide gigabit Ethernet adapters in each LPAR and run a crossover cable
• C、Create a Virtual Ethernet between the production server and the TSM LPARs
• D、Create a Virtual Ethernet between the TSM server LPAR and the non-production LPARs

第9题：

Company.com would like to configure a virtual Ethernet between an AIX V5.3 LPAR and an AIX V5.2 LPAR. Which of the following options is necessary to complete this task？（）

• A、Remove the physical Ethernet adapters from the LPARs
• B、Activate Advanced POWER Virtualization
• C、Update microcode for the virtual adapters
• D、Upgrade AIX V5.2 LPAR to AIX V5.3

第10题：

Companycom is planning on upgrading from a pSeries S85 running AIX 4.3.3 to a p5 570 with an HMC. The new server will run AIX 5L 5.2. What should be performed prior to the migration?（）

• A、Verify the ISV application runs on AIX 5.2
• B、Power4 to POWER5 upgrades are not supported without a application recompile
• C、Check the placement and size of the boot logical volume and disk space requirements on the S85
• D、AIX 4.3.3 to AIX 5L 5.2 migrations are perfectly compatible so nothing needs to be checked